Messages in this thread | | | Date | Mon, 06 Sep 2021 16:28:14 +0530 | From | skakit@codeauro ... | Subject | Re: [PATCH V2 2/2] arm64: dts: sc7280: Add volume up support for sc7280-idp |
| |
On 2021-09-03 23:42, Stephen Boyd wrote: > Quoting satya priya (2021-09-02 02:15:06) >> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi >> b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi >> index 371a2a9..52bcbbc 100644 >> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi >> @@ -199,6 +199,37 @@ >> modem-init; >> }; >> >> +&soc { > > 's' comes after 'p' so this is in the wrong place. >
Okay will move it accordingly.
>> + gpio_keys { >> + compatible = "gpio-keys"; >> + label = "gpio-keys"; >> + >> + pinctrl-names = "default"; >> + pinctrl-0 = <&key_vol_up_default>; >> + >> + vol_up { >> + label = "volume_up"; >> + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; >> + linux,input-type = <1>; >> + linux,code = <KEY_VOLUMEUP>; >> + gpio-key,wakeup; >> + debounce-interval = <15>; >> + linux,can-disable; >> + }; >> + }; >> +}; >> + >> +&pm7325_gpios { >> + key_vol_up_default: key_vol_up_default { > > Please move this to the "PINCTRL - additions to nodes defined in > sc7280.dtsi" section and then sort alphabetically on node naem. >
Okay.
>> + pins = "gpio6"; >> + function = "normal"; >> + input-enable; >> + bias-pull-up; >> + power-source = <0>; >> + qcom,drive-strength = <3>; >> + }; >> +}; >> + >> &pmk8350_vadc { >> pmk8350_die_temp { >> reg = <PMK8350_ADC7_DIE_TEMP>;
| |