lkml.org 
[lkml]   [2021]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 1/4] dt-bindings: pincfg-node: Add "output-impedance" property
Date
On RZ/G2L SoC for Group-B pins, output impedance can be configured.
This patch documents "output-impedance" property in pincfg-node.yaml so
that other platforms requiring such feature can make use of this property.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
index 71ed0a9def84..cdcb23daeca2 100644
--- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
@@ -114,6 +114,10 @@ properties:
description: enable output on a pin without actively driving it
(such as enabling an output buffer)

+ output-impedance:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: set the pins output impedance at most X ohm
+
output-low:
type: boolean
description: set the pin to output mode with low level
--
2.17.1
\
 
 \ /
  Last update: 2021-09-30 14:18    [W:0.078 / U:3.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site