lkml.org 
[lkml]   [2021]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [EXTERNAL] Re: [PATCH] ASoC: max98373: Mark cache dirty before entering sleep
Date
> -----Original Message-----
> From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> Sent: Monday, September 27, 2021 10:23 AM
> To: Mark Brown <broonie@kernel.org>
> Cc: guennadi.liakhovetski@linux.intel.com; alsa-devel@alsa-project.org;
> ryan.lee.maxim@gmail.com; Ryan Lee <RyanS.Lee@maximintegrated.com>;
> linux-kernel@vger.kernel.org; tiwai@suse.com; lgirdwood@gmail.com;
> sathya.prakash.m.r@intel.com; yung-chuan.liao@linux.intel.com
> Subject: Re: [EXTERNAL] Re: [PATCH] ASoC: max98373: Mark cache dirty
> before entering sleep
>
> EXTERNAL EMAIL
>
>
>
> On 9/27/21 12:10 PM, Mark Brown wrote:
> > On Mon, Sep 27, 2021 at 11:48:56AM -0500, Pierre-Louis Bossart wrote:
> >> On 9/27/21 11:06 AM, Mark Brown wrote:
> >
> >>> More specifically what it does is make the invalidation of the
> >>> register cache unconditional. It doesn't really matter if the
> >>> invalidation is done on suspend or resume, so long as it happens
> >>> before we attempt to resync - this could also be done by deleting the
> first_hw_init check.
> >
> >> Mark, that's exactly my point: if the amp rejoins the bus, we will
> >> *always* mark the cache as dirty, before the resync is done in the
> >> resume sequence.
> >
> > Ah, yes - I see.
> >
> >> I am really trying to figure out if we have a major flaw in the
> >> resume sequence and why things are different in the case of the Maxim
> amp.
> >
> >> Instead of changing the suspend sequence, can we please try to modify
> >> the max98373_io_init() routine to unconditionally flag the cache as
> >> dirty, maybe this points to a problem with the management of the
> >> max98373->first_hw_init flag.
> >
> > A quick survey of other drivers suggests that this pattern should be
> > factored out into some helpers as it looks like there's several ways
> > of implementing it that look very similar but not quite the same...
>
> No disagreement here, we tried really hard to enforce a common pattern for
> suspend-resume, but i just noticed that the maxim amp driver is different on
> suspend (resume is consistent with the rest).

OK. I believe it was similar before. But it looks like 'regcache_mark_dirty' is being
disappeared on suspend function.

static int __maybe_unused rt5682_dev_suspend(struct device *dev)
{
struct rt5682_priv *rt5682 = dev_get_drvdata(dev);

if (!rt5682->hw_init)
return 0;

cancel_delayed_work_sync(&rt5682->jack_detect_work);

regcache_cache_only(rt5682->regmap, true);
regcache_mark_dirty(rt5682->regmap);

return 0;
}

>
>
> static int __maybe_unused rt711_dev_suspend(struct device *dev) {
> struct rt711_priv *rt711 = dev_get_drvdata(dev);
>
> if (!rt711->hw_init)
> return 0;
>
> cancel_delayed_work_sync(&rt711->jack_detect_work);
> cancel_delayed_work_sync(&rt711->jack_btn_check_work);
> cancel_work_sync(&rt711->calibration_work);
>
> regcache_cache_only(rt711->regmap, true);
>
> return 0;
> }
>
> static int __maybe_unused rt1308_dev_suspend(struct device *dev) {
> struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev);
>
> if (!rt1308->hw_init)
> return 0;
>
> regcache_cache_only(rt1308->regmap, true);
>
> return 0;
> }
>
> static __maybe_unused int max98373_suspend(struct device *dev) {
> struct max98373_priv *max98373 = dev_get_drvdata(dev);
> int i;
>
> <<<< missing test
>
> /* cache feedback register values before suspend */
> for (i = 0; i < max98373->cache_num; i++)
> regmap_read(max98373->regmap, max98373->cache[i].reg,
> &max98373->cache[i].val);
>
> <<<< why is this needed???
[]
It looks like this was added to get a last ADC values when ADC value read is not available during suspension.
https://www.spinics.net/lists/alsa-devel/msg119808.html

>
> regcache_cache_only(max98373->regmap, true);
>
> return 0;
> }
>
>

\
 
 \ /
  Last update: 2021-09-28 18:43    [W:0.076 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site