lkml.org 
[lkml]   [2021]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: marvell: add Globalscale MOCHAbin
On Thu, Sep 23, 2021 at 7:32 PM Andrew Lunn <andrew@lunn.ch> wrote:
>
> > + /* 88E6141 Topaz switch */
> > + switch: switch@3 {
> > + compatible = "marvell,mv88e6085";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <3>;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&cp0_switch_pins>;
> > + reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
> > +
> > + interrupt-parent = <&cp0_gpio1>;
> > + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
>
> The switch interrupt is a level interrupt, not an edge interrupt.

Hi Andrew,
thanks for catching this.
The same is true for the PCA9554 as well.
Will fix that now in v3.

Regards,
Robert
>
> Andrew



--
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@sartura.hr
Web: www.sartura.hr

\
 
 \ /
  Last update: 2021-09-23 20:15    [W:0.046 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site