lkml.org 
[lkml]   [2021]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mmc: sdhci-of-at91: wait for calibration done before proceed
From
Date
On 15/09/21 1:28 pm, Claudiu Beznea wrote:
> Datasheet specifies that at the end of calibration the SDMMC_CALCR_EN
> bit will be cleared. No commands should be send before calibration is
> done.
>
> Fixes: dbdea70f71d67 ("mmc: sdhci-of-at91: fix CALCR register being rewritten")
> Fixes: 727d836a375ad ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset")
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
> drivers/mmc/host/sdhci-of-at91.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
> index 5564d7b23e7c..2b28711e039d 100644
> --- a/drivers/mmc/host/sdhci-of-at91.c
> +++ b/drivers/mmc/host/sdhci-of-at91.c
> @@ -114,6 +114,8 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
> {
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + unsigned long timeout = jiffies + msecs_to_jiffies(20);
> + unsigned int tmp;
>
> sdhci_reset(host, mask);
>
> @@ -126,6 +128,14 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
>
> sdhci_writel(host, calcr | SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN,
> SDMMC_CALCR);
> +
> + do {
> + tmp = sdhci_readl(host, SDMMC_CALCR);
> + } while (time_before(jiffies, timeout) &&
> + (tmp & SDMMC_CALCR_EN));
> +
> + if (tmp & SDMMC_CALCR_EN)
> + dev_err(mmc_dev(host->mmc), "Failed to calibrate\n");

Please use a polling macro (include <linux/iopoll.h>)
i.e.

if (read_poll_timeout(sdhci_readl, tmp, !(tmp & SDMMC_CALCR_EN),
10, 20000, false, host, SDMMC_CALCR))
dev_err(mmc_dev(host->mmc), "Failed to calibrate\n");



> }
> }
>
>

\
 
 \ /
  Last update: 2021-09-23 11:03    [W:0.042 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site