lkml.org 
[lkml]   [2021]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 5/5] net: dsa: bcm_sf2: Request APD, DLL disable and IDDQ-SR
Date
When interfacing with a Broadcom PHY, request the auto-power down, DLL
disable and IDDQ-SR modes to be enabled.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/bcm_sf2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 6ce9ec1283e0..aa713936d77c 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -667,7 +667,9 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
if (priv->int_phy_mask & BIT(port))
return priv->hw_params.gphy_rev;
else
- return 0;
+ return PHY_BRCM_AUTO_PWRDWN_ENABLE |
+ PHY_BRCM_DIS_TXCRXC_NOENRGY |
+ PHY_BRCM_IDDQ_SUSPEND;
}

static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port,
--
2.25.1
\
 
 \ /
  Last update: 2021-09-21 04:05    [W:0.136 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site