lkml.org 
[lkml]   [2021]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4] iommu/of: Fix pci_request_acs() before enumerating PCI devices
On Wed, 1 Sept 2021 at 11:58, Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2021-09-01 09:59, Marek Szyprowski wrote:
> > On 21.05.2021 05:03, Wang Xingang wrote:
> >> From: Xingang Wang <wangxingang5@huawei.com>
> >>
> >> When booting with devicetree, the pci_request_acs() is called after the
> >> enumeration and initialization of PCI devices, thus the ACS is not
> >> enabled. And ACS should be enabled when IOMMU is detected for the
> >> PCI host bridge, so add check for IOMMU before probe of PCI host and call
> >> pci_request_acs() to make sure ACS will be enabled when enumerating PCI
> >> devices.
> >>
> >> Fixes: 6bf6c24720d33 ("iommu/of: Request ACS from the PCI core when
> >> configuring IOMMU linkage")
> >> Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
> >
> > This patch landed in linux-next as commit 57a4ab1584e6 ("iommu/of: Fix
> > pci_request_acs() before enumerating PCI devices"). Sadly it breaks PCI
> > operation on ARM Juno R1 board (arch/arm64/boot/dts/arm/juno-r1.dts). It

We've seen this on ARM Juno R2 boards too in the Linaro testfarm.

The problem is that the device can't get the "SATA link up" while booting.

see https://lkft.validation.linaro.org/scheduler/job/3416767#L577

When reverting this patch we are able to see the "SATA link up".

Cheers,
Anders

\
 
 \ /
  Last update: 2021-09-02 14:53    [W:1.213 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site