lkml.org 
[lkml]   [2021]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
Hi Frieder,

Am Mi., 15. Sept. 2021 um 14:09 Uhr schrieb Frieder Schrempf
<frieder.schrempf@kontron.de>:
>
> On 15.09.21 14:05, Michael Walle wrote:
> > Am 2021-09-15 14:03, schrieb Heiko Thiery:
> >> The buck2 output of the PMIC is the VDD core voltage of the cpu.
> >> Switching off this will poweroff the CPU. Add the 'regulator-always-on'
> >> property to avoid this.
> >
> > Mh, have this ever worked? Is there a commit which introduced a regression?
>
> Yes, this did work before, even without 'regulator-always-on'. I
> currently don't understand why this is needed. The regulator is
> referenced in the CPU nodes as 'cpu-supply'. This should be enough to
> not disable it as long as the CPU is up.

I rechecked that with 5.11, 5.10 and 5.9 and I see on all of them the
same issue:

[ 31.716031] vdd-5v: disabling
[ 31.719032] rst-usb-eth2: disabling
[ 31.722553] buck2: disabling

While on that I tried to compare with other boards and see that they
also have the cpu-voltage marked as "regulator-always-on". The only
exception in dts/freescale is in imx8mq-librem5-devkit.dts [1] that
has not set this property.

I agree with you and don't understand why this is happening. Has
anyone else an explanation?

[1] https://elixir.bootlin.com/linux/latest/source/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts#L319

--
Heiko

\
 
 \ /
  Last update: 2021-09-17 09:29    [W:0.068 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site