lkml.org 
[lkml]   [2021]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/8] clk: qcom: gpucc-msm8998: Use ARRAY_SIZE for num_parents
Date
Where possible, use ARRAY_SIZE to determine the number of parents in
clk_parent_data, instead of hardcoding it.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
drivers/clk/qcom/gpucc-msm8998.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/gpucc-msm8998.c b/drivers/clk/qcom/gpucc-msm8998.c
index fedfffaf0a8d..3ac6fbfbd414 100644
--- a/drivers/clk/qcom/gpucc-msm8998.c
+++ b/drivers/clk/qcom/gpucc-msm8998.c
@@ -126,7 +126,7 @@ static struct clk_rcg2 rbcpr_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "rbcpr_clk_src",
.parent_data = gpu_xo_gpll0,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gpu_xo_gpll0),
.ops = &clk_rcg2_ops,
},
};
@@ -144,7 +144,7 @@ static struct clk_rcg2 gfx3d_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "gfx3d_clk_src",
.parent_data = gpu_xo_gpupll0,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gpu_xo_gpupll0),
.ops = &clk_rcg2_ops,
.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
},
@@ -163,7 +163,7 @@ static struct clk_rcg2 rbbmtimer_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "rbbmtimer_clk_src",
.parent_data = gpu_xo_gpll0,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gpu_xo_gpll0),
.ops = &clk_rcg2_ops,
},
};
@@ -184,7 +184,7 @@ static struct clk_rcg2 gfx3d_isense_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "gfx3d_isense_clk_src",
.parent_data = gpu_xo_gpll0,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(gpu_xo_gpll0),
.ops = &clk_rcg2_ops,
},
};
--
2.33.0
\
 
 \ /
  Last update: 2021-09-11 14:15    [W:0.097 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site