lkml.org 
[lkml]   [2021]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] iio: adc: ad7793: Fix IRQ flag
On Mon, 6 Sep 2021 09:56:30 +0300
<alexandru.tachici@analog.com> wrote:

> From: Alexandru Tachici <alexandru.tachici@analog.com>
>
> In Sigma-Delta devices the SDO line is also used as an interrupt.
> Leaving IRQ on level instead of falling might trigger a sample read
> when the IRQ is enabled, as the SDO line is already low. Not sure
> if SDO line will always imediately go high in ad_sd_buffer_postenable
> before the IRQ is enabled.
>
> Also the datasheet seem to explicitly say the falling edge of the SDO
> should be used as an interrupt:
> From the AD7793 datasheet: " The DOUT/RDY falling edge can be
> used as an interrupt to a processor"
>
> Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags")
> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Applied to the fixes-togreg branch of iio.git and marked for stable.

Thanks,

Jonathan

> ---
> drivers/iio/adc/ad7793.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
> index ef3e2d3ecb0c..0e7ab3fb072a 100644
> --- a/drivers/iio/adc/ad7793.c
> +++ b/drivers/iio/adc/ad7793.c
> @@ -206,7 +206,7 @@ static const struct ad_sigma_delta_info ad7793_sigma_delta_info = {
> .has_registers = true,
> .addr_shift = 3,
> .read_mask = BIT(6),
> - .irq_flags = IRQF_TRIGGER_LOW,
> + .irq_flags = IRQF_TRIGGER_FALLING,
> };
>
> static const struct ad_sd_calib_data ad7793_calib_arr[6] = {

\
 
 \ /
  Last update: 2021-09-11 19:45    [W:0.064 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site