lkml.org 
[lkml]   [2021]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH v2 2/5] dt-bindings: display: mediatek: dsi: add documentation for MT8167 SoC
    Hi, Fabien:

    Fabien Parent <fparent@baylibre.com> 於 2020年10月23日 週五 下午9:31寫道:
    >
    > Add binding documentation for the MT8167 SoC.

    Applied to mediatek-drm-next [1], thanks.

    [1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

    Regards,
    Chun-Kuang.

    >
    > Signed-off-by: Fabien Parent <fparent@baylibre.com>
    > ---
    >
    > Changelog:
    >
    > V2: removed part that added a new clock
    >
    > .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 4 ++--
    > 1 file changed, 2 insertions(+), 2 deletions(-)
    >
    > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
    > index f06f24d405a5..6a10de812158 100644
    > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
    > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
    > @@ -7,7 +7,7 @@ channel output.
    >
    > Required properties:
    > - compatible: "mediatek,<chip>-dsi"
    > -- the supported chips are mt2701, mt7623, mt8173 and mt8183.
    > +- the supported chips are mt2701, mt7623, mt8167, mt8173 and mt8183.
    > - reg: Physical base address and length of the controller's registers
    > - interrupts: The interrupt signal from the function block.
    > - clocks: device clocks
    > @@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
    >
    > Required properties:
    > - compatible: "mediatek,<chip>-mipi-tx"
    > -- the supported chips are mt2701, 7623, mt8173 and mt8183.
    > +- the supported chips are mt2701, 7623, mt8167, mt8173 and mt8183.
    > - reg: Physical base address and length of the controller's registers
    > - clocks: PLL reference clock
    > - clock-output-names: name of the output clock line to the DSI encoder
    > --
    > 2.28.0
    >

    \
     
     \ /
      Last update: 2021-08-09 16:07    [W:3.249 / U:0.876 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site