lkml.org 
[lkml]   [2021]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RESEND PATCH v9 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
    Date
    Add devicetree binding document for ADXL355, a 3-Axis MEMS Accelerometer.

    Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
    ---
    .../bindings/iio/accel/adi,adxl355.yaml | 88 +++++++++++++++++++
    1 file changed, 88 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml

    diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
    new file mode 100644
    index 000000000..ba54d6998
    --- /dev/null
    +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
    @@ -0,0 +1,88 @@
    +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
    +%YAML 1.2
    +---
    +$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
    +$schema: http://devicetree.org/meta-schemas/core.yaml#
    +
    +title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
    +
    +maintainers:
    + - Puranjay Mohan <puranjay12@gmail.com>
    +
    +description: |
    + Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
    + both I2C & SPI interfaces
    + https://www.analog.com/en/products/adxl355.html
    +
    +properties:
    + compatible:
    + enum:
    + - adi,adxl355
    +
    + reg:
    + maxItems: 1
    +
    + interrupts:
    + minItems: 1
    + maxItems: 3
    + description: |
    + Type for DRDY should be IRQ_TYPE_EDGE_RISING.
    + Three configurable interrupt lines exist.
    +
    + interrupt-names:
    + description: Specify which interrupt line is in use.
    + items:
    + enum:
    + - INT1
    + - INT2
    + - DRDY
    + minItems: 1
    + maxItems: 3
    +
    + vdd-supply:
    + description: Regulator that provides power to the sensor
    +
    + vddio-supply:
    + description: Regulator that provides power to the bus
    +
    + spi-max-frequency: true
    +
    +required:
    + - compatible
    + - reg
    +
    +additionalProperties: false
    +
    +examples:
    + - |
    + #include <dt-bindings/gpio/gpio.h>
    + #include <dt-bindings/interrupt-controller/irq.h>
    + i2c {
    + #address-cells = <1>;
    + #size-cells = <0>;
    +
    + /* Example for a I2C device node */
    + accelerometer@1d {
    + compatible = "adi,adxl355";
    + reg = <0x1d>;
    + interrupt-parent = <&gpio>;
    + interrupts = <25 IRQ_TYPE_EDGE_RISING>;
    + interrupt-names = "DRDY";
    + };
    + };
    + - |
    + #include <dt-bindings/gpio/gpio.h>
    + #include <dt-bindings/interrupt-controller/irq.h>
    + spi {
    + #address-cells = <1>;
    + #size-cells = <0>;
    +
    + accelerometer@0 {
    + compatible = "adi,adxl355";
    + reg = <0>;
    + spi-max-frequency = <1000000>;
    + interrupt-parent = <&gpio>;
    + interrupts = <25 IRQ_TYPE_EDGE_RISING>;
    + interrupt-names = "DRDY";
    + };
    + };
    --
    2.30.1
    \
     
     \ /
      Last update: 2021-08-09 10:08    [W:2.521 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site