lkml.org 
[lkml]   [2021]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] media: hantro: Fix check for single irq
Date
Dne petek, 06. avgust 2021 ob 00:03:36 CEST je Ezequiel Garcia napisal(a):
> Hi Jernej,
>
> On Thu, 2021-08-05 at 21:04 +0200, Jernej Skrabec wrote:
> > Some cores use only one interrupt and in such case interrupt name in DT
> > is not needed. Driver supposedly accounted that, but due to the wrong
> > field check it never worked. Fix that.
> >
> > Fixes: 18d6c8b7b4c9 ("media: hantro: add fallback handling for single
> > irq/clk") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> > ---
> > drivers/staging/media/hantro/hantro_drv.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/staging/media/hantro/hantro_drv.c
> > b/drivers/staging/media/hantro/hantro_drv.c index
> > 8a2edd67f2c6..20e508158871 100644
> > --- a/drivers/staging/media/hantro/hantro_drv.c
> > +++ b/drivers/staging/media/hantro/hantro_drv.c
> > @@ -919,7 +919,7 @@ static int hantro_probe(struct platform_device *pdev)
> > if (!vpu->variant->irqs[i].handler)
> > continue;
> >
> > - if (vpu->variant->num_clocks > 1) {
> > + if (vpu->variant->num_irqs > 1) {
>
> Oops, thanks for spotting this.
>
> How about this instead?

No, original solution is more robust. With solution below, you're assuming
that irq order in driver array is same as in DT. That doesn't matter if there
is only one name or if names match. However, if there is a typo, either in DT
node or in driver, driver will still happily assign clock based on index and
that might not be correct one. Even if it works out, you can easily miss that
you have a typo. Driver doesn't tell you which irq is used, if it is
successfully acquired.

Best regards,
Jernej

>
> diff --git a/drivers/staging/media/hantro/hantro_drv.c
> b/drivers/staging/media/hantro/hantro_drv.c index
> 31d8449ca1d2..af7054b04155 100644
> --- a/drivers/staging/media/hantro/hantro_drv.c
> +++ b/drivers/staging/media/hantro/hantro_drv.c
> @@ -918,16 +918,15 @@ static int hantro_probe(struct platform_device *pdev)
> if (!vpu->variant->irqs[i].handler)
> continue;
>
> - if (vpu->variant->num_clocks > 1) {
> - irq_name = vpu->variant->irqs[i].name;
> - irq = platform_get_irq_byname(vpu->pdev, irq_name);
> - } else {
> + irq_name = vpu->variant->irqs[i].name;
> + irq = platform_get_irq_byname(vpu->pdev, irq_name);
> + if (irq <= 0) {
> /*
> - * If the driver has a single IRQ, chances are there
> - * will be no actual name in the DT bindings. +
> * Missing interrupt-names property in device tree, +
> * looking up interrupts by index.
> */
> irq_name = "default";
> - irq = platform_get_irq(vpu->pdev, 0);
> + irq = platform_get_irq(vpu->pdev, i);
> }
> if (irq <= 0)
> return -ENXIO;




\
 
 \ /
  Last update: 2021-08-06 06:45    [W:0.063 / U:2.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site