lkml.org 
[lkml]   [2021]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] dt-bindings: mmc: pwrseq-sd8787: add binding for delay b/w reset and power
Date
Add documentation for binding that specifies the delay that should
be introduced b/w reset and power lines when powering up the device.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
index e0169a285aa2..4b1e89750e94 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
@@ -23,6 +23,10 @@ properties:
description:
contains a reset GPIO specifier with the default active state

+ reset-power-delay-ms:
+ description:
+ Delay in ms between powerdown and reset gpios
+
required:
- compatible
- powerdown-gpios
--
2.25.1
\
 
 \ /
  Last update: 2021-08-06 13:32    [W:0.046 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site