lkml.org 
[lkml]   [2021]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] rsi: fix occasional initialisation failure with BT coex
Date
When BT coexistence is enabled (eg oper mode 13, which is the default)
the initialisation on startup sometimes silently fails.

In a normal initialisation we see
usb 1-1.3: Product: Wireless USB Network Module
usb 1-1.3: Manufacturer: Redpine Signals, Inc.
usb 1-1.3: SerialNumber: 000000000001
rsi_91x: rsi_probe: Initialized os intf ops
rsi_91x: rsi_load_9116_firmware: Loading chunk 0
rsi_91x: rsi_load_9116_firmware: Loading chunk 1
rsi_91x: rsi_load_9116_firmware: Loading chunk 2
rsi_91x: Max Stations Allowed = 1

But sometimes the last log is missing and the wlan net device is
not created.

Running a userspace loop that resets the hardware via a GPIO shows the
problem occurring ~5/100 resets.

The problem does not occur in oper mode 1 (wifi only).

Adding logs shows that the initialisation state machine requests a MAC
reset via rsi_send_reset_mac() but the firmware does not reply, leading
to the initialisation sequence being incomplete.

Fix this by delaying attaching the BT adapter until the wifi
initialisation has completed.

With this applied I have done > 300 reset loops with no errors.

Fixes: 716b840c7641 ("rsi: handle BT traffic in driver")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
CC: stable@vger.kernel.org
---
drivers/net/wireless/rsi/rsi_91x_main.c | 16 +++++++++++++---
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 3 +++
drivers/net/wireless/rsi/rsi_main.h | 3 ++-
3 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index 29d8304..aece1d3 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -210,9 +210,10 @@ int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
bt_pkt_type = frame_desc[offset + BT_RX_PKT_TYPE_OFST];
if (bt_pkt_type == BT_CARD_READY_IND) {
rsi_dbg(INFO_ZONE, "BT Card ready recvd\n");
- if (rsi_bt_ops.attach(common, &g_proto_ops))
- rsi_dbg(ERR_ZONE,
- "Failed to attach BT module\n");
+ if (common->fsm_state == FSM_MAC_INIT_DONE)
+ rsi_attach_bt(common);
+ else
+ common->bt_defer_attach = true;
} else {
if (common->bt_adapter)
rsi_bt_ops.recv_pkt(common->bt_adapter,
@@ -277,6 +278,15 @@ void rsi_set_bt_context(void *priv, void *bt_context)
}
#endif

+void rsi_attach_bt(struct rsi_common *common)
+{
+#ifdef CONFIG_RSI_COEX
+ if (rsi_bt_ops.attach(common, &g_proto_ops))
+ rsi_dbg(ERR_ZONE,
+ "Failed to attach BT module\n");
+#endif
+}
+
/**
* rsi_91x_init() - This function initializes os interface operations.
* @void: Void.
diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
index ed67f65..50c4b9b 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -2056,6 +2056,9 @@ static int rsi_handle_ta_confirm_type(struct rsi_common *common,
if (common->reinit_hw) {
complete(&common->wlan_init_completion);
} else {
+ if (common->bt_defer_attach)
+ rsi_attach_bt(common);
+
return rsi_mac80211_attach(common);
}
}
diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h
index b3e25bc..b983cc5 100644
--- a/drivers/net/wireless/rsi/rsi_main.h
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -320,6 +320,7 @@ struct rsi_common {
struct ieee80211_vif *roc_vif;

bool eapol4_confirm;
+ bool bt_defer_attach;
void *bt_adapter;

struct cfg80211_scan_request *hwscan;
@@ -401,5 +402,5 @@ struct rsi_host_intf_ops {

enum rsi_host_intf rsi_get_host_intf(void *priv);
void rsi_set_bt_context(void *priv, void *bt_context);
-
+void rsi_attach_bt(struct rsi_common *common);
#endif
--
1.9.1
\
 
 \ /
  Last update: 2021-08-06 12:25    [W:1.067 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site