lkml.org 
[lkml]   [2021]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1
    Date
    From: Bin Meng <bin.meng@windriver.com>

    Per the DT spec, 'local-mac-address' is used to specify MAC address
    that was assigned to the network device, while 'mac-address' is used
    to specify the MAC address that was last used by the boot program,
    and shall be used only if the value differs from 'local-mac-address'
    property value.

    Signed-off-by: Bin Meng <bin.meng@windriver.com>
    Reviewed-by: conor dooley <conor.dooley@microchip.com>
    ---

    (no changes since v1)

    arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +-
    1 file changed, 1 insertion(+), 1 deletion(-)

    diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
    index 0659068b62f7..a9c558366d61 100644
    --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
    +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
    @@ -317,7 +317,7 @@ emac1: ethernet@20112000 {
    reg = <0x0 0x20112000 0x0 0x2000>;
    interrupt-parent = <&plic>;
    interrupts = <70 71 72 73>;
    - mac-address = [00 00 00 00 00 00];
    + local-mac-address = [00 00 00 00 00 00];
    clocks = <&clkcfg 5>, <&clkcfg 2>;
    status = "disabled";
    clock-names = "pclk", "hclk";
    --
    2.25.1
    \
     
     \ /
      Last update: 2021-08-04 14:30    [W:5.508 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site