lkml.org 
[lkml]   [2021]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5] asus-wmi: Add support for custom fan curves
Date
On 8/27/21 8:26 AM, Barnabás Pőcze wrote:
> Hi
>
>
> +CC Guenter Roeck as he may be able to tell us if there's an established
> way to export fan curves.
>

If I understand the context correctly, one would normally define pairs
of pwmX_auto_pointN_temp and pwmX_auto_pointN_pwm, with _temp
being the temperature in milli-degrees C and _pwm being a pwm value
between 0 and 255. Normally the X would refer to different fans/pwm
channels, but one could "tweak" that and declare that pwm1 is quiet,
pwm2 is default, and pwm3 is performance. One could then use pwm1_enable
values (2..4) to select the active mode.

The format isn't documented here, though, so it is hard to say if that
would be a good match. And I won't start analyzing the code trying
to understand in detail what it actually does.

Guenter

> I have added a couple comments.
> There are places where spaces are used instead of tabs.
>
>
> 2021. augusztus 27., péntek 1:42 keltezéssel, Luke D. Jones írta:
>> Add support for custom fan curves found on some ASUS ROG laptops.
>>
>> These laptops have the ability to set a custom curve for the CPU
>> and GPU fans via an ACPI method call. This patch enables this,
>> additionally enabling custom fan curves per-profile, where profile
>> here means each of the 3 levels of "throttle_thermal_policy".
>>
>> Signed-off-by: Luke D. Jones <luke@ljones.dev>
>> ---
>> drivers/platform/x86/asus-wmi.c | 616 ++++++++++++++++++++-
>> include/linux/platform_data/x86/asus-wmi.h | 2 +
>> 2 files changed, 616 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
>> index cc5811844012..944644ae0acd 100644
>> --- a/drivers/platform/x86/asus-wmi.c
>> +++ b/drivers/platform/x86/asus-wmi.c
>> @@ -108,6 +108,11 @@ module_param(fnlock_default, bool, 0444);
>>
>> static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL };
>>
>> +static int throttle_thermal_policy_write(struct asus_wmi*);
>> +static ssize_t fan_curve_store(struct asus_wmi *asus, const char *buf,
>> + size_t count, u32 dev, char **curve,
>> + char *default_curve);
>> +
>> static bool ashs_present(void)
>> {
>> int i = 0;
>> @@ -122,7 +127,8 @@ struct bios_args {
>> u32 arg0;
>> u32 arg1;
>> u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. */
>> - u32 arg4;
>> + u32 arg3;
>> + u32 arg4; /* Some ROG laptops require a full 5 input args */
>> u32 arg5;
>> } __packed;
>>
>> @@ -173,6 +179,21 @@ enum fan_type {
>> FAN_TYPE_SPEC83, /* starting in Spec 8.3, use CPU_FAN_CTRL */
>> };
>>
>> +struct fan_curve {
>> + char *balanced;
>> + char *balanced_default;
>> + char *performance;
>> + char *performance_default;
>> + char *quiet;
>> + char *quiet_default;
>> +};
>> +
>> +struct enabled_fan_curves {
>> + bool balanced;
>> + bool performance;
>> + bool quiet;
>> +};
>> +
>> struct asus_wmi {
>> int dsts_id;
>> int spec;
>> @@ -220,6 +241,14 @@ struct asus_wmi {
>> bool throttle_thermal_policy_available;
>> u8 throttle_thermal_policy_mode;
>>
>> + bool cpu_fan_curve_available;
>> + struct fan_curve cpu_fan_curve;
>> +
>> + bool gpu_fan_curve_available;
>> + struct fan_curve gpu_fan_curve;
>> +
>> + struct enabled_fan_curves enabled_fan_curve_profiles;
>
> I would suggest something like the following:
>
> struct fan_curve {
> /* bool enabled; */
> u8 temps[FAN_CURVE_SIZE];
> u8 percents[FAN_CURVE_SIZE];
> };
>
> struct fan {
> bool available;
> struct fan_curve curves[NUM_PERF_PROFILES];
> };
>
> struct asus_wmi {
> ...
>
> struct fan fans[NUM_FANS];
>
> bool fan_curve_enabled_for_profile[NUM_PERF_PROFILES];
> /* or maybe you could add it as `bool enabled;` into the inner struct */
> };
>
> see the reason later.
>
>
>> +
>> struct platform_profile_handler platform_profile_handler;
>> bool platform_profile_support;
>>
>> @@ -285,6 +314,85 @@ int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval)
>> }
>> EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
>>
>> +static int asus_wmi_evaluate_method5(u32 method_id,
>> + u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval)
>> +{
>> + struct bios_args args = {
>> + .arg0 = arg0,
>> + .arg1 = arg1,
>> + .arg2 = arg2,
>> + .arg3 = arg3,
>> + .arg4 = arg4,
>> + };
>> + struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
>> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
>> + acpi_status status;
>> + union acpi_object *obj;
>> + u32 tmp = 0;
>> +
>> + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
>> + &input, &output);
>> +
>> + if (ACPI_FAILURE(status))
>> + return -EIO;
>> +
>> + obj = (union acpi_object *)output.pointer;
>
> Small thing, but this cast is unnecessary.
>
>
>> + if (obj && obj->type == ACPI_TYPE_INTEGER)
>> + tmp = (u32) obj->integer.value;
>
> Same here.
>
>
>> +
>> + if (retval)
>> + *retval = tmp;
>> +
>> + kfree(obj);
>> +
>> + if (tmp == ASUS_WMI_UNSUPPORTED_METHOD)
>> + return -ENODEV;
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Returns as an error if the method output is not a buffer. Typically this
>> + * means that the method called is unsupported.
>> +*/
>> +static int asus_wmi_evaluate_method_buf(u32 method_id,
>> + u32 arg0, u32 arg1, u8 *ret_buffer)
>> +{
>> + struct bios_args args = {
>> + .arg0 = arg0,
>> + .arg1 = arg1,
>> + .arg2 = 0,
>> + };
>> + struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
>> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
>> + acpi_status status;
>> + union acpi_object *obj;
>> + u32 int_tmp = 0;
>> +
>> + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
>> + &input, &output);
>> +
>> + if (ACPI_FAILURE(status))
>> + return -EIO;
>> +
>> + obj = (union acpi_object *)output.pointer;
>> +
>> + if (obj && obj->type == ACPI_TYPE_INTEGER) {
>> + int_tmp = (u32) obj->integer.value;
>> + if (int_tmp == ASUS_WMI_UNSUPPORTED_METHOD)
>> + return -ENODEV;
>> + return int_tmp;
>> + }
>> +
>> + if (obj && obj->type == ACPI_TYPE_BUFFER) {
>> + memcpy(ret_buffer, obj->buffer.pointer, obj->buffer.length);
>> + }
>> +
>> + kfree(obj);
>> +
>> + return 0;
>> +}
>> +
>> static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args)
>> {
>> struct acpi_buffer input;
>> @@ -1813,7 +1921,7 @@ static ssize_t fan1_label_show(struct device *dev,
>> struct device_attribute *attr,
>> char *buf)
>> {
>> - return sprintf(buf, "%s\n", ASUS_FAN_DESC);
>> + return sprintf(buf, "%s", ASUS_FAN_DESC);
>
> What is the reason for this change?
>
>
>> }
>>
>> static ssize_t asus_hwmon_temp1(struct device *dev,
>> @@ -2043,6 +2151,458 @@ static ssize_t fan_boost_mode_store(struct device *dev,
>> // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
>> static DEVICE_ATTR_RW(fan_boost_mode);
>>
>> +/* Custom fan curves per-profile **********************************************/
>> +
>> +/*
>> + * Check if the ability to set fan curves on either fan exists, and store the
>> + * defaults for recall later plus to provide users with a starting point.
>> + *
>> + * "dev" is either CPU_FAN_CURVE or GPU_FAN_CURVE.
>> +*/
>> +static int custom_fan_check_present(struct asus_wmi *asus,
>> + bool *available, u32 dev)
>> +{
>> + struct fan_curve *curves = &asus->cpu_fan_curve;
>> + u8 *buf = kzalloc(16 * sizeof(u8), GFP_KERNEL);
>
> Is dynamic allocation needed here? No early return frees it.
>
>
>> + /* 15 punctuation marks + 16 sets of numbers up to 3 char each */
>> + int str_len = 15 + 16 * 3;
>
> It appears to me that the terminating null byte is not accounted for. E.g.:
>
> 255:255,255:255,255:255,255:255,255:255,255:255,255:255,255:255
>
> is itself already 63 (= 15 + 16 x 3) characters.
>
> And if the maximum length is known, and it's reasonably small, why is it not
> part of the struct as a char array? E.g.:
>
> struct fan_curve {
> char balanced[FAN_CURVE_STR_SIZE]; /* #define FAN_CURVE_STR_SIZE 64 */
> ...
> };
>
> I would actually suggest storing the u8 array itself in the fan curve struct,
> and not a string representation of it. I think the data is easier to deal with
> that way, and the price of formatting it for the sysfs attribute is not
> significant.
>
>
>> + int err;
>> +
>> + *available = false;
>> +
>> + if (dev == ASUS_WMI_DEVID_GPU_FAN_CURVE)
>> + curves = &asus->gpu_fan_curve;
>> +
>> + /* Balanced default */
>> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 0, buf);
>> + if (err) {
>> + if (err == -ENODEV)
>> + return 0;
>> + return err;
>> + }
>> +
>> + curves->balanced = kzalloc(str_len * sizeof(char), GFP_KERNEL);
>> + if (!curves->balanced)
>> + return -ENOMEM;
>> +
>> + curves->balanced_default = kzalloc(str_len * sizeof(char), GFP_KERNEL);
>> + if (!curves->balanced_default)
>> + return -ENOMEM;
>> +
>> + sprintf(curves->balanced, "%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d",
>> + buf[0], buf[8], buf[1], buf[9], buf[2], buf[10], buf[3], buf[11],
>> + buf[4], buf[12], buf[5], buf[13], buf[6], buf[14], buf[7], buf[15]);
>> + sprintf(curves->balanced_default, curves->balanced);
>> +
>> + /* Quiet default */
>> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 1, buf);
>> + if (err) {
>> + if (err == -ENODEV)
>> + return 0;
>> + return err;
>> + }
>> +
>> + curves->quiet = kzalloc(str_len * sizeof(char), GFP_KERNEL);
>> + if (!curves->quiet)
>> + return -ENOMEM;
>> +
>> + curves->quiet_default = kzalloc(str_len * sizeof(char), GFP_KERNEL);
>> + if (!curves->quiet_default)
>> + return -ENOMEM;
>> +
>> + sprintf(curves->quiet, "%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d",
>> + buf[0], buf[8], buf[1], buf[9], buf[2], buf[10], buf[3], buf[11],
>> + buf[4], buf[12], buf[5], buf[13], buf[6], buf[14], buf[7], buf[15]);
>> + sprintf(curves->quiet_default, curves->quiet);
>> +
>> + /* Performance default */
>> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 2, buf);
>> + if (err) {
>> + if (err == -ENODEV)
>> + return 0;
>> + return err;
>> + }
>> +
>> + curves->performance = kzalloc(str_len * sizeof(char), GFP_KERNEL);
>> + if (!curves->performance)
>> + return -ENOMEM;
>> +
>> + curves->performance_default = kzalloc(str_len * sizeof(char), GFP_KERNEL);
>> + if (!curves->performance_default)
>> + return -ENOMEM;
>> +
>> + sprintf(curves->performance,
>> + "%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d",
>> + buf[0], buf[8], buf[1], buf[9], buf[2], buf[10], buf[3], buf[11],
>> + buf[4], buf[12], buf[5], buf[13], buf[6], buf[14], buf[7], buf[15]);
>> + sprintf(curves->performance_default, curves->performance);
>
> More or less the same code is repeated three times, I'd consider adding an e.g.
>
> void fan_curve_to_str(..., char[static FAN_CURVE_STR_SIZE]);
>
> function.
>
>
>> +
>> + kfree(buf);
>> +
>> + *available = true;
>> + return 0;
>> +}
>> +
>> +/*
>> + * The expected input is of the format
>> + * "30:1,49:2,59:3,69:4,79:31,89:49,99:56,109:58"
>> + * where a pair is 30:1, with 30 = temperature, and 1 = percentage
>> +*/
>> +static int fan_curve_write(struct asus_wmi *asus, u32 dev, char *curve)
>> +{
>> + char * buf, *set, *pair_tmp, *pair, *set_end, *pair_end;
>> + int err, ret;
>> +
>> + char *set_delimiter = ",";
>> + char *pair_delimiter = ":";
>> + bool half_complete = false;
>> + bool pair_start = true;
>> + u32 prev_percent = 0;
>> + u32 prev_temp = 0;
>> + u32 percent = 0;
>> + u32 shift = 0;
>> + u32 temp = 0;
>> + u32 arg1 = 0;
>> + u32 arg2 = 0;
>> + u32 arg3 = 0;
>> + u32 arg4 = 0;
>> +
>> + buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
>> +
>> + while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
>> + pair_tmp = kstrdup(set, GFP_KERNEL);
>> + pair_start = true;
>> + while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
>> + err = kstrtouint(pair, 10, &ret);
>> + if (err) {
>> + kfree(pair_tmp);
>> + kfree(buf);
>> + return err;
>> + }
>> +
>> + if (pair_start) {
>> + temp = ret;
>> + pair_start = false;
>> + } else {
>> + percent = ret;
>> + }
>> + }
>> + kfree(pair_tmp);
>> +
>> + if (temp < prev_temp || percent < prev_percent || percent > 100) {
>> + pr_info("Fan curve invalid");
>> + pr_info("A value is sequentially lower or percentage is > 100");
>> + kfree(buf);
>> + return -EINVAL;
>> + }
>> +
>> + prev_temp = temp;
>> + prev_percent = percent;
>> +
>> + if (!half_complete) {
>> + arg1 += temp << shift;
>> + arg3 += percent << shift;
>> + } else {
>> + arg2 += temp << shift;
>> + arg4 += percent << shift;
>> + }
>
> As far as I see using 64-bit integers would avoid the need for `half_complete`, et al.
>
>
>> + shift += 8;
>> +
>> + if (shift == 32) {
>> + shift = 0;
>> + half_complete = true;
>> + }
>> + }
>> + kfree(buf);
>> +
>
> If you don't insist on using commas, I think it is much simpler to
> parse it using `sscanf()`, e.g.:
>
> unsigned int temp, prct;
> int at = 0, len;
>
> while (sscanf(&buf[at], "%u:%u %n", &temp, &prct, &len) == 2) {
> /* process `temp` and `prct` */
>
> at += len;
> }
>
> if (buf[at] != '\0')
> /* error */;
>
> This also has the advantage that you don't need dynamic memory allocation.
>
>
>> + return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, dev,
>> + arg1, arg2, arg3, arg4, &ret);
>> +}
>> +
>> +static int fan_curve_cpu_write(struct asus_wmi *asus)
>> +{
>> + char *curve = NULL;
>> + int err, mode;
>> +
>> + mode = asus->throttle_thermal_policy_mode;
>> +
>> + if (mode == ASUS_THROTTLE_THERMAL_POLICY_DEFAULT
>> + && asus->enabled_fan_curve_profiles.balanced) {
>> + curve = asus->cpu_fan_curve.balanced;
>> + } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST
>> + && asus->enabled_fan_curve_profiles.performance) {
>> + curve = asus->cpu_fan_curve.performance;
>> + } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_SILENT
>> + && asus->enabled_fan_curve_profiles.quiet) {
>> + curve = asus->cpu_fan_curve.quiet;
>> + }
>> +
>> + if (curve != NULL) {
>> + err = fan_curve_write(asus, ASUS_WMI_DEVID_CPU_FAN_CURVE, curve);
>> + if (err)
>> + return err;
>> + }
>> + return 0;
>> +}
>> +
>> +
>> +static int fan_curve_gpu_write(struct asus_wmi *asus)
>> +{
>> + char *curve = NULL;
>> + int err, mode;
>> +
>> + mode = asus->throttle_thermal_policy_mode;
>> +
>> + if (mode == ASUS_THROTTLE_THERMAL_POLICY_DEFAULT
>> + && asus->enabled_fan_curve_profiles.balanced) {
>> + curve = asus->gpu_fan_curve.balanced;
>> + } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST
>> + && asus->enabled_fan_curve_profiles.performance) {
>> + curve = asus->gpu_fan_curve.performance;
>> + } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_SILENT
>> + && asus->enabled_fan_curve_profiles.quiet) {
>> + curve = asus->gpu_fan_curve.quiet;
>> + }
>> +
>> + if (curve != NULL) {
>> + err = fan_curve_write(asus, ASUS_WMI_DEVID_GPU_FAN_CURVE, curve);
>> + if (err)
>> + return err;
>> + }
>> + return 0;
>> +}
>> +
>> +static ssize_t fan_curve_store(struct asus_wmi *asus, const char *buf,
>> + size_t count, u32 dev, char **curve,
>> + char *default_curve)
>> +{
>> + int err;
>> +
>> + /* Allow a user to write "" or " " to erase a curve setting */
>> + if (strlen(buf) <= 1 || strcmp(buf, " \n") == 0) {
>> + kfree(*curve);
>> + *curve = kstrdup(default_curve, GFP_KERNEL);
>> + err = throttle_thermal_policy_write(asus);
>> + if (err)
>> + return err;
>> + return count;
>> + }
>> +
>> + if (*curve)
>> + kfree(*curve);
>> + *curve = kstrdup(buf, GFP_KERNEL);
>> +
>> + /* Maybe activate fan curve if in associated mode */
>> + err = throttle_thermal_policy_write(asus);
>> + if (err) {
>> + kfree(*curve);
>> + *curve = kstrdup(default_curve, GFP_KERNEL);
>> + return err;
>> + }
>> +
>> + return count;
>> +}
>> +
>> +/*
>> + * CPU Fan Curves
>> +*/
>> +
>> +static ssize_t cpu_fan_curve_balanced_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s", asus->cpu_fan_curve.balanced);
>> +}
>> +
>> +static ssize_t cpu_fan_curve_balanced_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_CPU_FAN_CURVE,
>> + &asus->cpu_fan_curve.balanced,
>> + asus->cpu_fan_curve.balanced_default);
>> +}
>> +
>> +static DEVICE_ATTR_RW(cpu_fan_curve_balanced);
>> +
>> +static ssize_t cpu_fan_curve_performance_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s", asus->cpu_fan_curve.performance);
>> +}
>> +
>> +static ssize_t cpu_fan_curve_performance_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_CPU_FAN_CURVE,
>> + &asus->cpu_fan_curve.performance,
>> + asus->cpu_fan_curve.performance_default);
>> +}
>> +
>> +static DEVICE_ATTR_RW(cpu_fan_curve_performance);
>> +
>> +static ssize_t cpu_fan_curve_quiet_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s", asus->cpu_fan_curve.quiet);
>> +}
>> +
>> +static ssize_t cpu_fan_curve_quiet_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_CPU_FAN_CURVE,
>> + &asus->cpu_fan_curve.quiet,
>> + asus->cpu_fan_curve.quiet_default);
>> +}
>> +
>> +static DEVICE_ATTR_RW(cpu_fan_curve_quiet);
>> +
>> +/*
>> + * GPU Fan Curves
>> +*/
>> +
>> +static ssize_t gpu_fan_curve_balanced_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s", asus->gpu_fan_curve.balanced);
>> +}
>> +
>> +static ssize_t gpu_fan_curve_balanced_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_GPU_FAN_CURVE,
>> + &asus->gpu_fan_curve.balanced,
>> + asus->gpu_fan_curve.balanced_default);
>> +}
>> +
>> +static DEVICE_ATTR_RW(gpu_fan_curve_balanced);
>> +
>> +static ssize_t gpu_fan_curve_performance_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s", asus->gpu_fan_curve.performance);
>> +}
>> +
>> +static ssize_t gpu_fan_curve_performance_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_GPU_FAN_CURVE,
>> + &asus->gpu_fan_curve.performance,
>> + asus->gpu_fan_curve.performance_default);
>> +}
>> +
>> +static DEVICE_ATTR_RW(gpu_fan_curve_performance);
>> +
>> +static ssize_t gpu_fan_curve_quiet_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s", asus->gpu_fan_curve.quiet);
>> +}
>> +
>> +static ssize_t gpu_fan_curve_quiet_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_GPU_FAN_CURVE,
>> + &asus->gpu_fan_curve.quiet,
>> + asus->gpu_fan_curve.quiet_default);
>> +}
>> +
>> +static DEVICE_ATTR_RW(gpu_fan_curve_quiet);
>
> Even though it is a hwmon thing, I think `SENSOR_ATTR_2()` (from linux/hwmon-sysfs.h)
> would be very useful here as you'd avoid creating n+1 functions, e.g:
>
> static ssize_t fan_curve_show(struct device *dev, struct device_attribute *attr, char *buf)
> {
> struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> struct asus_wmi *asus = dev_get_drvdata(dev);
>
> /*
> * if you stored fan curves in an array, you could then access the fan
> * curve in `asus->fans[sattr->index].curves[sattr->nr]`
> * /
> }
>
> static SENSOR_DEVICE_ATTR_2(some_name1, 0644, fan_curve_show, fan_curve_store,
> FAN_CPU /* index in the "fans" array */,
> ASUS_THROTTLE_THERMAL_POLICY_SILENT /* index in the "curves" array */);
>
>
>> +
>> +/*
>> + * Profiles with enabled fan curve setting
>> +*/
>> +
>> +static int enabled_fan_curve_profiles_write(struct asus_wmi *asus,
>> + const char *names)
>> +{
>> + char *buf, *set, *set_end;
>> + int err;
>> +
>> + buf = set_end = kstrdup(names, GFP_KERNEL);
>> +
>> + /* Reset before checking */
>> + asus->enabled_fan_curve_profiles.balanced = false;
>> + asus->enabled_fan_curve_profiles.quiet = false;
>> + asus->enabled_fan_curve_profiles.performance = false;
>> +
>> + while( (set = strsep(&set_end, " ")) != NULL ) {
>> + if (set == NULL)
>
> When is this possible?
>
>
>> + set = buf;
>> +
>> + if (strcmp(set, "balanced") == 0
>> + || strcmp(set, "balanced\n") == 0)
>> + asus->enabled_fan_curve_profiles.balanced = true;
>> +
>> + if (strcmp(set, "quiet") == 0
>> + || strcmp(set, "quiet\n") == 0)
>> + asus->enabled_fan_curve_profiles.quiet = true;
>> +
>> + if (strcmp(set, "performance") == 0
>> + || strcmp(set, "performance\n") == 0)
>> + asus->enabled_fan_curve_profiles.performance = true;
>
> If you store the enabled curves in an array, and you have a list of profile names,
> then `sysfs_match_string()`, will be very helpful here. You could do something like:
>
> int profile = sysfs_match_string(profile_names, set);
> if (profile < 0) {
> /* not found */
> }
>
> asus->fan_curve_enabled_for_profile[profile] = true;
>
>
>> + }
>> +
>> + err = throttle_thermal_policy_write(asus);
>> + if (err)
>> + return err;
>> +
>> + kfree(buf);
>> +
>> + return 0;
>> +}
>> +
>> +static ssize_t enabled_fan_curve_profiles_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + int len = 0;
>> +
>> + if (asus->enabled_fan_curve_profiles.balanced)
>> + len += sysfs_emit_at(buf, len, "balanced ");
>> +
>> + if (asus->enabled_fan_curve_profiles.performance)
>> + len += sysfs_emit_at(buf, len, "performance ");
>> +
>> + if (asus->enabled_fan_curve_profiles.quiet)
>> + len += sysfs_emit_at(buf, len, "quiet ");
>> +
>> + len += sysfs_emit_at(buf, len, "\n");
>> + return len;
>> +}
>> +
>> +static ssize_t enabled_fan_curve_profiles_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + int err;
>> +
>> + err = enabled_fan_curve_profiles_write(asus, buf);
>> + if (err)
>> + return err;
>> +
>> + return count;
>> +}
>> +
>> +static DEVICE_ATTR_RW(enabled_fan_curve_profiles);
>> +
>> /* Throttle thermal policy ****************************************************/
>>
>> static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
>> @@ -2092,6 +2652,26 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)
>> return -EIO;
>> }
>>
>> + if (asus->cpu_fan_curve_available) {
>> + err = fan_curve_cpu_write(asus);
>> + if (err) {
>> + dev_warn(&asus->platform_device->dev,
>> + "Failed to set custom CPU curve for thermal policy: %d\n",
>> + err);
>> + return err;
>> + }
>> + }
>> +
>> + if (asus->gpu_fan_curve_available) {
>> + err = fan_curve_gpu_write(asus);
>> + if (err) {
>> + dev_warn(&asus->platform_device->dev,
>> + "Failed to set custom GPU curve for thermal policy: %d\n",
>> + err);
>> + return err;
>> + } >> + }
>> +
>> return 0;
>> }
>>
>> @@ -2711,6 +3291,13 @@ static struct attribute *platform_attributes[] = {
>> &dev_attr_als_enable.attr,
>> &dev_attr_fan_boost_mode.attr,
>> &dev_attr_throttle_thermal_policy.attr,
>> + &dev_attr_cpu_fan_curve_balanced.attr,
>> + &dev_attr_cpu_fan_curve_performance.attr,
>> + &dev_attr_cpu_fan_curve_quiet.attr,
>> + &dev_attr_gpu_fan_curve_balanced.attr,
>> + &dev_attr_gpu_fan_curve_performance.attr,
>> + &dev_attr_gpu_fan_curve_quiet.attr,
>> + &dev_attr_enabled_fan_curve_profiles.attr,
>> &dev_attr_panel_od.attr,
>> NULL
>> };
>> @@ -2741,6 +3328,20 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj,
>> ok = asus->fan_boost_mode_available;
>> else if (attr == &dev_attr_throttle_thermal_policy.attr)
>> ok = asus->throttle_thermal_policy_available;
>> + else if (attr == &dev_attr_cpu_fan_curve_balanced.attr)
>> + ok = asus->cpu_fan_curve_available;
>> + else if (attr == &dev_attr_cpu_fan_curve_performance.attr)
>> + ok = asus->cpu_fan_curve_available;
>> + else if (attr == &dev_attr_cpu_fan_curve_quiet.attr)
>> + ok = asus->cpu_fan_curve_available;
>> + else if (attr == &dev_attr_gpu_fan_curve_balanced.attr)
>> + ok = asus->gpu_fan_curve_available;
>> + else if (attr == &dev_attr_gpu_fan_curve_performance.attr)
>> + ok = asus->gpu_fan_curve_available;
>> + else if (attr == &dev_attr_gpu_fan_curve_quiet.attr)
>> + ok = asus->gpu_fan_curve_available;
>> + else if (attr == &dev_attr_enabled_fan_curve_profiles.attr)
>> + ok = asus->cpu_fan_curve_available || asus->gpu_fan_curve_available;
>> else if (attr == &dev_attr_panel_od.attr)
>> ok = asus->panel_overdrive_available;
>>
>> @@ -3016,6 +3617,16 @@ static int asus_wmi_add(struct platform_device *pdev)
>> else
>> throttle_thermal_policy_set_default(asus);
>>
>> + err = custom_fan_check_present(asus, &asus->cpu_fan_curve_available,
>> + ASUS_WMI_DEVID_CPU_FAN_CURVE);
>> + if (err)
>> + goto fail_custom_fan_curve;
>> +
>> + err = custom_fan_check_present(asus, &asus->gpu_fan_curve_available,
>> + ASUS_WMI_DEVID_GPU_FAN_CURVE);
>> + if (err)
>> + goto fail_custom_fan_curve;
>> +
>> err = platform_profile_setup(asus);
>> if (err)
>> goto fail_platform_profile_setup;
>> @@ -3109,6 +3720,7 @@ static int asus_wmi_add(struct platform_device *pdev)
>> asus_wmi_sysfs_exit(asus->platform_device);
>> fail_sysfs:
>> fail_throttle_thermal_policy:
>> +fail_custom_fan_curve:
>> fail_platform_profile_setup:
>> if (asus->platform_profile_support)
>> platform_profile_remove();
>> diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
>> index 17dc5cb6f3f2..a571b47ff362 100644
>> --- a/include/linux/platform_data/x86/asus-wmi.h
>> +++ b/include/linux/platform_data/x86/asus-wmi.h
>> @@ -77,6 +77,8 @@
>> #define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011
>> #define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 /* deprecated */
>> #define ASUS_WMI_DEVID_CPU_FAN_CTRL 0x00110013
>> +#define ASUS_WMI_DEVID_CPU_FAN_CURVE 0x00110024
>> +#define ASUS_WMI_DEVID_GPU_FAN_CURVE 0x00110025
>>
>> /* Power */
>> #define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012
>> --
>> 2.31.1
>
>
> Best regards,
> Barnabás Pőcze
>

\
 
 \ /
  Last update: 2021-08-27 18:06    [W:0.145 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site