lkml.org 
[lkml]   [2021]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC net-next 2/2] net: dsa: tag_mtk: handle VLAN tag insertion on TX
From


On 8/26/2021 7:29 AM, DENG Qingfang wrote:
> On Thu, Aug 26, 2021 at 03:03:49AM +0300, Vladimir Oltean wrote:
>>
>> You cannot just remove the old code. Only things like 8021q uppers will
>> send packets with the VLAN in the hwaccel area.
>>
>> If you have an application that puts the VLAN in the actual AF_PACKET
>> payload, like:
>>
>> https://github.com/vladimiroltean/tsn-scripts/blob/master/isochron/send.c
>>
>> then you need to handle the VLAN being in the skb payload.
>
> I've actually tested this (only apply patch 2 without .features) and it
> still worked.

OK and this works because now you always push a MTK_HDR_LEN tag which
you were not doing before for VLAN-tagged frames, right?

You don't seem to be clearing mtk_tag[2] and mtk_tag[3] anymore, is that
intended?

>
> The comment says the VLAN tag need to be combined with the special tag in
> order to perform VLAN table lookup, so we can set its destination port
> vector to all zeroes and the switch will forward it like a data frame
> (TX forward offload), but as we allow multiple bridges which are either
> VLAN-unaware or VLAN-aware with the same VID, there is no way to determine
> the destination bridge unless we maintain some VLAN translation mapping.

There is no "bridge" on the other side from the CPU port's perspective
on egress, only physical ports, so how does that comment apply?
--
Florian

\
 
 \ /
  Last update: 2021-08-26 13:38    [W:0.105 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site