lkml.org 
[lkml]   [2021]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series
Date
On Fri,  6 Aug 2021 21:44:34 +0100, Matthew Hagan <mnhagan88@gmail.com> wrote:
> MX64 & MX64W Hardware info:
> - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
> - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
> - Storage: 1 GB (Micron MT29F8G08ABACA)
> - Networking: BCM58625 internal switch (5x 1GbE ports)
> - USB: 1x USB2.0
> - Serial: Internal header
> - WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus
>
> This patch adds the Meraki MX64 series-specific bindings. Since some
> devices make use of the older A0 SoC, changes need to be made to
> accommodate this case, including removal of coherency options and
> modification to the secondary-boot-reg.
>
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/master, thanks!
--
Florian

\
 
 \ /
  Last update: 2021-08-22 21:08    [W:0.054 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site