lkml.org 
[lkml]   [2021]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH devicetree 2/2] MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports
On Thu, Aug 19, 2021 at 08:04:16PM +0300, Vladimir Oltean wrote:
> The ocelot driver was converted to phylink, and that expects a valid
> phy_interface_t. Without a phy-mode, of_get_phy_mode returns
> PHY_INTERFACE_MODE_NA, which is not ideal because phylink rejects that.
>
> The ocelot driver was patched to treat PHY_INTERFACE_MODE_NA as
> PHY_INTERFACE_MODE_INTERNAL to work with the broken DT blobs, but we
> should fix the device trees and specify the phy-mode too.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---
> arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 4 ++++
> arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 4 ++++
> 2 files changed, 8 insertions(+)

applied to mips-next.

Thomas.

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]

\
 
 \ /
  Last update: 2021-08-21 11:26    [W:0.066 / U:2.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site