lkml.org 
[lkml]   [2021]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/1] asus-wmi: Add support for custom fan curves


On Fri, Aug 20 2021 at 12:18:39 +0200, Bastien Nocera
<hadess@hadess.net> wrote:
> On Fri, 2021-08-20 at 21:57 +1200, Luke D. Jones wrote:
>> Add support for custom fan curves found on some ASUS ROG laptops.
>>
>> These laptops have the ability to set a custom curve for the CPU
>> and GPU fans via an ACPI method call. This patch enables this,
>> additionally enabling custom fan curves per-profile, where profile
>> here means each of the 3 levels of "throttle_thermal_policy".
>
> I don't quite understand how this works. Are those fan controls
> supposed to add to the platform_profile implementation that just
> landed, or are the features mutually exclusive?

Ah sorry, I wasn't sure if I should have CC'd you or not.
The fan controls are mutually exclusive in terms of platform_profile,
but the patch *does* provide ability for users to modify only the fan
curve for each profile.

>
> If the curves can be controlled by end-users, what will make sure that
> the fan curve that's assigned to, say, the performance
> platform_profile
> actually corresponds to a "performance" setting?

It's fully controlled in kernel with specific pairing.

>
> Am I going to get bug reports from Asus users that will complain that
> power-profiles-daemon doesn't work correctly, where I will have to
> wearily ask if they're using an Asus Rog laptop?

No. Definitely not. The changes to fan curves per-profile need to be
explicitly enabled and set. So a new user will be unaware that this
control exists (until they look for it) and their laptop will behave
exactly as default.

>
> I'd certainly prefer the 2 features to be separate, and the
> platform_profile to not be available if the curves are custom, seeing
> as Asus presumably would know better than end-users what curves to
> apply for a particular workload.

As it turns out there are default curves per-profile that can be
fetched from ACPI call.

I and pretty much every user I've spoken to so far prefer to have the
ability to set a curve per-profile and have a platform_profile change
also set the related curve. The default factory mode fans are rather
weak tbh - by setting the fans slightly higher in performance profile I
got an extra 300Mhz CPU boost.

And I've gotten a lot of users who come from Windows request this. At
least with the ability in kernel then there won't be a need to use
"acpi_call" module.

I look at this as a power-user setting. As mentioned above, unless a
user already knows this ability exists then they won't be aware of it
and their laptop will work in stock standard default modes.


Regards,
Luke.
>
>>
>> Signed-off-by: Luke D. Jones <luke@ljones.dev>
>> ---
>> drivers/platform/x86/asus-wmi.c | 672
>> +++++++++++++++++++++
>> include/linux/platform_data/x86/asus-wmi.h | 2 +
>> 2 files changed, 674 insertions(+)
>>
>> diff --git a/drivers/platform/x86/asus-wmi.c
>> b/drivers/platform/x86/asus-wmi.c
>> index cc5811844012..a515207d1645 100644
>> --- a/drivers/platform/x86/asus-wmi.c
>> +++ b/drivers/platform/x86/asus-wmi.c
>> @@ -108,6 +108,11 @@ module_param(fnlock_default, bool, 0444);
>>
>> static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL
>> };
>>
>> +static int throttle_thermal_policy_write(struct asus_wmi*);
>> +static ssize_t fan_curve_store(struct asus_wmi *asus, const char
>> *buf,
>> +
>> size_
>> t count, u32 dev, char **curve,
>> + char
>> *default_curve, u32 throttle_policy);
>> +
>> static bool ashs_present(void)
>> {
>> int i = 0;
>> @@ -122,6 +127,7 @@ struct bios_args {
>> u32 arg0;
>> u32 arg1;
>> u32 arg2; /* At least TUF Gaming series uses 3 dword input
>> buffer. */
>> + u32 arg3;
>> u32 arg4;
>> u32 arg5;
>> } __packed;
>> @@ -173,6 +179,21 @@ enum fan_type {
>> FAN_TYPE_SPEC83, /* starting in Spec 8.3, use
>> CPU_FAN_CTRL */
>> };
>>
>> +struct fan_curve {
>> + char *balanced;
>> + char *balanced_default;
>> + char *performance;
>> + char *performance_default;
>> + char *quiet;
>> + char *quiet_default;
>> +};
>> +
>> +struct active_fan_curves {
>> + bool balanced;
>> + bool performance;
>> + bool quiet;
>> +};
>> +
>> struct asus_wmi {
>> int dsts_id;
>> int spec;
>> @@ -220,6 +241,14 @@ struct asus_wmi {
>> bool throttle_thermal_policy_available;
>> u8 throttle_thermal_policy_mode;
>>
>> + bool cpu_fan_curve_available;
>> + struct fan_curve cpu_fan_curve;
>> +
>> + bool gpu_fan_curve_available;
>> + struct fan_curve gpu_fan_curve;
>> +
>> + struct active_fan_curves active_fan_curve_profiles;
>> +
>> struct platform_profile_handler platform_profile_handler;
>> bool platform_profile_support;
>>
>> @@ -285,6 +314,85 @@ int asus_wmi_evaluate_method(u32 method_id, u32
>> arg0, u32 arg1, u32 *retval)
>> }
>> EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
>>
>> +static int asus_wmi_evaluate_method5(u32 method_id,
>> + u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4,
>> u32
>> *retval)
>> +{
>> + struct bios_args args = {
>> + .arg0 = arg0,
>> + .arg1 = arg1,
>> + .arg2 = arg2,
>> + .arg3 = arg3,
>> + .arg4 = arg4,
>> + };
>> + struct acpi_buffer input = { (acpi_size) sizeof(args), &args
>> };
>> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
>> + acpi_status status;
>> + union acpi_object *obj;
>> + u32 tmp = 0;
>> +
>> + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0,
>> method_id,
>> + &input, &output);
>> +
>> + if (ACPI_FAILURE(status))
>> + return -EIO;
>> +
>> + obj = (union acpi_object *)output.pointer;
>> + if (obj && obj->type == ACPI_TYPE_INTEGER)
>> + tmp = (u32) obj->integer.value;
>> +
>> + if (retval)
>> + *retval = tmp;
>> +
>> + kfree(obj);
>> +
>> + if (tmp == ASUS_WMI_UNSUPPORTED_METHOD)
>> + return -ENODEV;
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Returns as an error if the method output is not a buffer.
>> Typically this
>> + * means that the method called is unsupported.
>> +*/
>> +static int asus_wmi_evaluate_method_buf(u32 method_id,
>> + u32 arg0, u32 arg1, u8 *ret_buffer)
>> +{
>> + struct bios_args args = {
>> + .arg0 = arg0,
>> + .arg1 = arg1,
>> + .arg2 = 0,
>> + };
>> + struct acpi_buffer input = { (acpi_size) sizeof(args), &args
>> };
>> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
>> + acpi_status status;
>> + union acpi_object *obj;
>> + u32 int_tmp = 0;
>> +
>> + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0,
>> method_id,
>> + &input, &output);
>> +
>> + if (ACPI_FAILURE(status))
>> + return -EIO;
>> +
>> + obj = (union acpi_object *)output.pointer;
>> +
>> + if (obj && obj->type == ACPI_TYPE_INTEGER) {
>> + int_tmp = (u32) obj->integer.value;
>> + if (int_tmp == ASUS_WMI_UNSUPPORTED_METHOD)
>> + return -ENODEV;
>> + return int_tmp;
>> + }
>> +
>> + if (obj && obj->type == ACPI_TYPE_BUFFER && obj-
>> >buffer.length >= 16) {
>> + memcpy(ret_buffer, obj->buffer.pointer, obj-
>> >buffer.length);
>> + }
>> +
>> + kfree(obj);
>> +
>> + return 0;
>> +}
>> +
>> static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer
>> args)
>> {
>> struct acpi_buffer input;
>> @@ -2043,6 +2151,461 @@ static ssize_t fan_boost_mode_store(struct
>> device *dev,
>> // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
>> static DEVICE_ATTR_RW(fan_boost_mode);
>>
>> +/* Custom fan curves per-profile
>> **********************************************/
>> +
>> +static int custom_fan_check_present(struct asus_wmi *asus,
>> +
>> bool *available, u32 dev)
>> +{
>> + struct fan_curve *curves = &asus->cpu_fan_curve;
>> + u8 *b = kzalloc(16 * sizeof(u8), GFP_KERNEL);
>> + /* 15 punctuation marks + 16 sets of numbers up to 3 char
>> each */
>> + int str_len = 15 + 16 * 3;
>> + int err;
>> +
>> + *available = false;
>> +
>> + if (dev == ASUS_WMI_DEVID_GPU_FAN_CURVE)
>> + curves = &asus->gpu_fan_curve;
>> +
>> + /* Balanced default */
>> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 0,
>> b);
>> + if (err) {
>> + if (err == -ENODEV)
>> + return 0;
>> + return err;
>> + }
>> +
>> + curves->balanced = kzalloc(str_len * sizeof(char),
>> GFP_KERNEL);
>> + if (!curves->balanced)
>> + return -ENOMEM;
>> +
>> + curves->balanced_default = kzalloc(str_len * sizeof(char),
>> GFP_KERNEL);
>> + if (!curves->balanced_default)
>> + return -ENOMEM;
>> +
>> + sprintf(curves->balanced,
>> "%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d",
>> + b[0], b[8], b[1], b[9], b[2], b[10], b[3], b[11],
>> + b[4], b[12], b[5], b[13], b[6], b[14], b[7], b[15]);
>> + sprintf(curves->balanced_default, curves->balanced);
>> +
>> + /* Quiet default */
>> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 1,
>> b);
>> + if (err) {
>> + if (err == -ENODEV)
>> + return 0;
>> + return err;
>> + }
>> +
>> + curves->quiet = kzalloc(str_len * sizeof(char), GFP_KERNEL);
>> + if (!curves->quiet)
>> + return -ENOMEM;
>> +
>> + curves->quiet_default = kzalloc(str_len * sizeof(char),
>> GFP_KERNEL);
>> + if (!curves->quiet_default)
>> + return -ENOMEM;
>> +
>> + sprintf(curves->quiet,
>> "%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d",
>> + b[0], b[8], b[1], b[9], b[2], b[10], b[3], b[11],
>> + b[4], b[12], b[5], b[13], b[6], b[14], b[7], b[15]);
>> + sprintf(curves->quiet_default, curves->quiet);
>> +
>> + /* Performance default */
>> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 2,
>> b);
>> + if (err) {
>> + if (err == -ENODEV)
>> + return 0;
>> + return err;
>> + }
>> +
>> + curves->performance = kzalloc(str_len * sizeof(char),
>> GFP_KERNEL);
>> + if (!curves->performance)
>> + return -ENOMEM;
>> +
>> + curves->performance_default = kzalloc(str_len *
>> sizeof(char),
>> GFP_KERNEL);
>> + if (!curves->performance_default)
>> + return -ENOMEM;
>> +
>> + sprintf(curves->performance,
>> + "%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d,%d:%d",
>> + b[0], b[8], b[1], b[9], b[2], b[10], b[3], b[11],
>> + b[4], b[12], b[5], b[13], b[6], b[14], b[7], b[15]);
>> + sprintf(curves->performance_default, curves->performance);
>> +
>> + kfree(b);
>> +
>> + *available = true;
>> + return 0;
>> +}
>> +
>> +/*
>> + * The expected input is of the format
>> + * "30:1,49:2,59:3,69:4,79:31,89:49,99:56,109:58"
>> + * where a pair is 30:1, with 30 = temperature, and 1 = percentage
>> +*/
>> +static int fan_curve_check_valid(const char *curve)
>> +{
>> + char * buf, *set, *set_end, *pair_tmp, *pair, *pair_end;
>> + int err, ret;
>> +
>> + char *set_delimiter = ",";
>> + char *pair_delimiter = ":";
>> + bool pair_start = true;
>> + u32 prev_percent = 0;
>> + u32 prev_temp = 0;
>> + u32 percent = 0;
>> + u32 temp = 0;
>> +
>> + buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
>> +
>> + while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
>> + pair_tmp = kstrdup(set, GFP_KERNEL);
>> + pair_start = true;
>> + while( (pair = strsep(&pair_tmp, pair_delimiter)) !=
>> NULL ) {
>> + err = kstrtouint(pair, 10, &ret);
>> + if (err) {
>> + kfree(pair_tmp);
>> + kfree(buf);
>> + return err;
>> + }
>> +
>> + if (pair_start) {
>> + temp = ret;
>> + pair_start = false;
>> + } else {
>> + percent = ret;
>> + }
>> + }
>> + kfree(pair_tmp);
>> +
>> + if (temp < prev_temp || percent < prev_percent || percent >
>> 100) {
>> + pr_info("Fan curve invalid");
>> + pr_info("A value is sequentially lower or
>> percentage is > 100");
>> + kfree(buf);
>> + return -EINVAL;
>> + }
>> +
>> + prev_temp = temp;
>> + prev_percent = percent;
>> + }
>> + kfree(buf);
>> +
>> + return 0;
>> +}
>> +
>> +static int fan_curve_write(struct asus_wmi *asus, u32 dev, char
>> *curve)
>> +{
>> + char * buf, *set, *pair_tmp, *pair, *set_end, *pair_end;
>> + int err, ret;
>> +
>> + char *set_delimiter = ",";
>> + char *pair_delimiter = ":";
>> + bool half_complete = false;
>> + bool pair_start = true;
>> + u32 percent = 0;
>> + u32 shift = 0;
>> + u32 temp = 0;
>> + u32 arg1 = 0;
>> + u32 arg2 = 0;
>> + u32 arg3 = 0;
>> + u32 arg4 = 0;
>> +
>> + buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
>> +
>> + while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
>> + pair_tmp = kstrdup(set, GFP_KERNEL);
>> + pair_start = true;
>> + while( (pair = strsep(&pair_tmp, pair_delimiter)) !=
>> NULL ) {
>> + err = kstrtouint(pair, 10, &ret);
>> + if (err) {
>> + kfree(pair_tmp);
>> + kfree(buf);
>> + return err;
>> + }
>> +
>> + if (pair_start) {
>> + temp = ret;
>> + pair_start = false;
>> + } else {
>> + percent = ret;
>> + }
>> + }
>> + kfree(pair_tmp);
>> +
>> + if (!half_complete) {
>> + arg1 += temp << shift;
>> + arg3 += percent << shift;
>> + } else {
>> + arg2 += temp << shift;
>> + arg4 += percent << shift;
>> + }
>> + shift += 8;
>> +
>> + if (shift == 32) {
>> + shift = 0;
>> + half_complete = true;
>> + }
>> + }
>> + kfree(buf);
>> +
>> + return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, dev,
>> +
>> arg1, arg2, arg3, arg4, &ret);
>> +}
>> +
>> +static ssize_t fan_curve_store(struct asus_wmi *asus, const char
>> *buf,
>> +
>> size_
>> t count, u32 dev, char **curve,
>> + char
>> *default_curve, u32 throttle_policy)
>> +{
>> + int err;
>> +
>> + /* Allow a user to write "" or " " to erase a curve setting
>> */
>> + if (strlen(buf) <= 1 || strcmp(buf, " \n") == 0) {
>> + kfree(*curve);
>> + *curve = kstrdup(default_curve, GFP_KERNEL);
>> + err = throttle_thermal_policy_write(asus);
>> + if (err)
>> + return err;
>> + return count;
>> + }
>> +
>> + err = fan_curve_check_valid(buf);
>> + if (err)
>> + return err;
>> +
>> + if (*curve)
>> + kfree(*curve);
>> +
>> + /* Always save fan curve if it is valid */
>> + *curve = kstrdup(buf, GFP_KERNEL);
>> +
>> + /* Maybe activate fan curve if in associated mode */
>> + if (asus->throttle_thermal_policy_mode == throttle_policy) {
>> + err = fan_curve_write(asus, dev, *curve);
>> + if (err)
>> + return err;
>> + }
>> +
>> + return count;
>> +}
>> +
>> +/*
>> + * CPU Fan Curves
>> +*/
>> +
>> +static ssize_t cpu_fan_curve_balanced_show(struct device *dev,
>> + struct device_attribute *attr,
>> char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s\n", asus-
>> >cpu_fan_curve.balanced);
>> +}
>> +
>> +static ssize_t cpu_fan_curve_balanced_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count,
>> ASUS_WMI_DEVID_CPU_FAN_CURVE,
>> + &asus-
>> >cpu_fan_curve.balanced,
>> + asus-
>> >cpu_fan_curve.balanced_default,
>> + ASUS_THROTTLE_THERMAL_POLICY_DEFAULT);
>> +}
>> +
>> +static DEVICE_ATTR_RW(cpu_fan_curve_balanced);
>> +
>> +static ssize_t cpu_fan_curve_performance_show(struct device *dev,
>> + struct device_attribute *attr,
>> char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s\n", asus-
>> >cpu_fan_curve.performance);
>> +}
>> +
>> +static ssize_t cpu_fan_curve_performance_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count,
>> ASUS_WMI_DEVID_CPU_FAN_CURVE,
>> + &asus-
>> >cpu_fan_curve.performance,
>> + asus-
>> >cpu_fan_curve.performance_default,
>> +
>> ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST);
>> +}
>> +
>> +static DEVICE_ATTR_RW(cpu_fan_curve_performance);
>> +
>> +static ssize_t cpu_fan_curve_quiet_show(struct device *dev,
>> + struct device_attribute *attr,
>> char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s\n", asus-
>> >cpu_fan_curve.quiet);
>> +}
>> +
>> +static ssize_t cpu_fan_curve_quiet_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count,
>> ASUS_WMI_DEVID_CPU_FAN_CURVE,
>> + &asus-
>> >cpu_fan_curve.quiet,
>> + asus-
>> >cpu_fan_curve.quiet_default,
>> + ASUS_THROTTLE_THERMAL_POLICY_SILENT);
>> +}
>> +
>> +static DEVICE_ATTR_RW(cpu_fan_curve_quiet);
>> +
>> +/*
>> + * GPU Fan Curves
>> +*/
>> +
>> +static ssize_t gpu_fan_curve_balanced_show(struct device *dev,
>> + struct device_attribute *attr,
>> char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s\n", asus-
>> >gpu_fan_curve.balanced);
>> +}
>> +
>> +static ssize_t gpu_fan_curve_balanced_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count,
>> ASUS_WMI_DEVID_GPU_FAN_CURVE,
>> + &asus-
>> >gpu_fan_curve.balanced,
>> + asus-
>> >gpu_fan_curve.balanced_default,
>> + ASUS_THROTTLE_THERMAL_POLICY_DEFAULT);
>> +}
>> +
>> +static DEVICE_ATTR_RW(gpu_fan_curve_balanced);
>> +
>> +static ssize_t gpu_fan_curve_performance_show(struct device *dev,
>> + struct device_attribute *attr,
>> char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s\n", asus-
>> >gpu_fan_curve.performance);
>> +}
>> +
>> +static ssize_t gpu_fan_curve_performance_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count,
>> ASUS_WMI_DEVID_GPU_FAN_CURVE,
>> + &asus-
>> >gpu_fan_curve.performance,
>> + asus-
>> >gpu_fan_curve.performance_default,
>> +
>> ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST);
>> +}
>> +
>> +static DEVICE_ATTR_RW(gpu_fan_curve_performance);
>> +
>> +static ssize_t gpu_fan_curve_quiet_show(struct device *dev,
>> + struct device_attribute *attr,
>> char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return scnprintf(buf, PAGE_SIZE, "%s\n", asus-
>> >gpu_fan_curve.quiet);
>> +}
>> +
>> +static ssize_t gpu_fan_curve_quiet_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + return fan_curve_store(asus, buf, count,
>> ASUS_WMI_DEVID_GPU_FAN_CURVE,
>> + &asus-
>> >gpu_fan_curve.quiet,
>> + asus-
>> >gpu_fan_curve.quiet_default,
>> + ASUS_THROTTLE_THERMAL_POLICY_SILENT);
>> +}
>> +
>> +static DEVICE_ATTR_RW(gpu_fan_curve_quiet);
>> +
>> +/*
>> + * Active curves per profile
>> +*/
>> +
>> +static int active_fan_curve_profiles_check_present(struct asus_wmi
>> *asus)
>> +{
>> + if (!asus->cpu_fan_curve_available || !asus-
>> >gpu_fan_curve_available)
>> + return -ENODEV;
>> +
>> + return 0;
>> +}
>> +
>> +
>> +static int active_fan_curve_profiles_write(struct asus_wmi *asus,
>> const char *names)
>> +{
>> + char *buf, *set, *set_end;
>> + int err;
>> +
>> + buf = set_end = kstrdup(names, GFP_KERNEL);
>> +
>> + /* Reset before checking */
>> + asus->active_fan_curve_profiles.balanced = false;
>> + asus->active_fan_curve_profiles.quiet = false;
>> + asus->active_fan_curve_profiles.performance = false;
>> +
>> + while( (set = strsep(&set_end, " ")) != NULL ) {
>> + if (set == NULL)
>> + set = buf;
>> +
>> + pr_info("SET: %s", set);
>> + pr_info("SET: %d", strcmp(set, "quiet"));
>> + pr_info("SET: %d", strcmp(set, "quiet\n"));
>> +
>> + if (strcmp(set, "balanced") == 0
>> + || strcmp(set, "balanced\n") == 0)
>> + asus->active_fan_curve_profiles.balanced =
>> true;
>> +
>> + if (strcmp(set, "quiet") == 0
>> + || strcmp(set, "quiet\n") == 0)
>> + asus->active_fan_curve_profiles.quiet =
>> true;
>> +
>> + if (strcmp(set, "performance") == 0
>> + || strcmp(set, "performance\n") ==
>> 0)
>> + asus->active_fan_curve_profiles.performance
>> =
>> true;
>> + }
>> +
>> + err = throttle_thermal_policy_write(asus);
>> + if (err)
>> + return err;
>> +
>> + kfree(buf);
>> +
>> + return 0;
>> +}
>> +
>> +static ssize_t active_fan_curve_profiles_show(struct device *dev,
>> + struct device_attribute *attr,
>> char *buf)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + int len = 0;
>> +
>> + if (asus->active_fan_curve_profiles.balanced)
>> + len += sysfs_emit_at(buf, len, "balanced ");
>> +
>> + if (asus->active_fan_curve_profiles.performance)
>> + len += sysfs_emit_at(buf, len, "performance ");
>> +
>> + if (asus->active_fan_curve_profiles.quiet)
>> + len += sysfs_emit_at(buf, len, "quiet ");
>> +
>> + len += sysfs_emit_at(buf, len, "\n");
>> +
>> + return len;
>> +}
>> +
>> +static ssize_t active_fan_curve_profiles_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct asus_wmi *asus = dev_get_drvdata(dev);
>> + int err;
>> +
>> + err = active_fan_curve_profiles_write(asus, buf);
>> + if (err)
>> + return err;
>> +
>> + return count;
>> +}
>> +
>> +static DEVICE_ATTR_RW(active_fan_curve_profiles);
>> +
>> /* Throttle thermal policy
>> ****************************************************/
>>
>> static int throttle_thermal_policy_check_present(struct asus_wmi
>> *asus)
>> @@ -2067,6 +2630,59 @@ static int
>> throttle_thermal_policy_check_present(struct asus_wmi *asus)
>> return 0;
>> }
>>
>> +static int throttle_thermal_policy_write_cpu_curves(struct asus_wmi
>> *asus)
>> +{
>> + char *curve = NULL;
>> + int err, mode;
>> +
>> + mode = asus->throttle_thermal_policy_mode;
>> +
>> + if (mode == ASUS_THROTTLE_THERMAL_POLICY_DEFAULT
>> + && asus-
>> >active_fan_curve_profiles.balanced) {
>> + curve = asus->cpu_fan_curve.balanced;
>> + } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST
>> + && asus-
>> >active_fan_curve_profiles.performance) {
>> + curve = asus->cpu_fan_curve.performance;
>> + } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_SILENT
>> + && asus-
>> >active_fan_curve_profiles.quiet) {
>> + curve = asus->cpu_fan_curve.quiet;
>> + }
>> +
>> + if (curve != NULL) {
>> + err = fan_curve_write(asus,
>> ASUS_WMI_DEVID_CPU_FAN_CURVE, curve);
>> + if (err)
>> + return err;
>> + }
>> + return 0;
>> +}
>> +
>> +
>> +static int throttle_thermal_policy_write_gpu_curves(struct asus_wmi
>> *asus)
>> +{
>> + char *curve = NULL;
>> + int err, mode;
>> +
>> + mode = asus->throttle_thermal_policy_mode;
>> +
>> + if (mode == ASUS_THROTTLE_THERMAL_POLICY_DEFAULT
>> + && asus-
>> >active_fan_curve_profiles.balanced) {
>> + curve = asus->gpu_fan_curve.balanced;
>> + } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST
>> + && asus-
>> >active_fan_curve_profiles.performance) {
>> + curve = asus->gpu_fan_curve.performance;
>> + } else if (mode == ASUS_THROTTLE_THERMAL_POLICY_SILENT
>> + && asus-
>> >active_fan_curve_profiles.quiet) {
>> + curve = asus->gpu_fan_curve.quiet;
>> + }
>> +
>> + if (curve != NULL) {
>> + err = fan_curve_write(asus,
>> ASUS_WMI_DEVID_GPU_FAN_CURVE, curve);
>> + if (err)
>> + return err;
>> + }
>> + return 0;
>> +}
>> +
>> static int throttle_thermal_policy_write(struct asus_wmi *asus)
>> {
>> int err;
>> @@ -2092,6 +2708,26 @@ static int
>> throttle_thermal_policy_write(struct asus_wmi *asus)
>> return -EIO;
>> }
>>
>> + if (asus->cpu_fan_curve_available) {
>> + err =
>> throttle_thermal_policy_write_cpu_curves(asus);
>> + if (err) {
>> + dev_warn(&asus->platform_device->dev,
>> + "Failed to set custom CPU curve for
>> thermal policy: %d\n",
>> + err);
>> + return err;
>> + }
>> + }
>> +
>> + if (asus->gpu_fan_curve_available) {
>> + err =
>> throttle_thermal_policy_write_gpu_curves(asus);
>> + if (err) {
>> + dev_warn(&asus->platform_device->dev,
>> + "Failed to set custom GPU curve for
>> thermal policy: %d\n",
>> + err);
>> + return err;
>> + }
>> + }
>> +
>> return 0;
>> }
>>
>> @@ -2711,6 +3347,13 @@ static struct attribute
>> *platform_attributes[]
>> = {
>> &dev_attr_als_enable.attr,
>> &dev_attr_fan_boost_mode.attr,
>> &dev_attr_throttle_thermal_policy.attr,
>> + &dev_attr_cpu_fan_curve_balanced.attr,
>> + &dev_attr_cpu_fan_curve_performance.attr,
>> + &dev_attr_cpu_fan_curve_quiet.attr,
>> + &dev_attr_gpu_fan_curve_balanced.attr,
>> + &dev_attr_gpu_fan_curve_performance.attr,
>> + &dev_attr_gpu_fan_curve_quiet.attr,
>> + &dev_attr_active_fan_curve_profiles.attr,
>> &dev_attr_panel_od.attr,
>> NULL
>> };
>> @@ -2741,6 +3384,20 @@ static umode_t asus_sysfs_is_visible(struct
>> kobject *kobj,
>> ok = asus->fan_boost_mode_available;
>> else if (attr == &dev_attr_throttle_thermal_policy.attr)
>> ok = asus->throttle_thermal_policy_available;
>> + else if (attr == &dev_attr_cpu_fan_curve_balanced.attr)
>> + ok = asus->cpu_fan_curve_available;
>> + else if (attr == &dev_attr_cpu_fan_curve_performance.attr)
>> + ok = asus->cpu_fan_curve_available;
>> + else if (attr == &dev_attr_cpu_fan_curve_quiet.attr)
>> + ok = asus->cpu_fan_curve_available;
>> + else if (attr == &dev_attr_gpu_fan_curve_balanced.attr)
>> + ok = asus->gpu_fan_curve_available;
>> + else if (attr == &dev_attr_gpu_fan_curve_performance.attr)
>> + ok = asus->gpu_fan_curve_available;
>> + else if (attr == &dev_attr_gpu_fan_curve_quiet.attr)
>> + ok = asus->gpu_fan_curve_available;
>> + else if (attr == &dev_attr_active_fan_curve_profiles.attr)
>> + ok = asus->cpu_fan_curve_available || asus-
>> >gpu_fan_curve_available;
>> else if (attr == &dev_attr_panel_od.attr)
>> ok = asus->panel_overdrive_available;
>>
>> @@ -3016,6 +3673,20 @@ static int asus_wmi_add(struct
>> platform_device
>> *pdev)
>> else
>> throttle_thermal_policy_set_default(asus);
>>
>> + err = custom_fan_check_present(asus, &asus-
>> >cpu_fan_curve_available,
>> + ASUS_WMI_DEVID_CPU_FAN_CURVE);
>> + if (err)
>> + goto fail_throttle_fan_curve;
>> +
>> + err = custom_fan_check_present(asus, &asus-
>> >gpu_fan_curve_available,
>> + ASUS_WMI_DEVID_GPU_FAN_CURVE);
>> + if (err)
>> + goto fail_throttle_fan_curve;
>> +
>> + err = active_fan_curve_profiles_check_present(asus);
>> + if (err)
>> + goto fail_throttle_fan_curve;
>> +
>> err = platform_profile_setup(asus);
>> if (err)
>> goto fail_platform_profile_setup;
>> @@ -3109,6 +3780,7 @@ static int asus_wmi_add(struct platform_device
>> *pdev)
>> asus_wmi_sysfs_exit(asus->platform_device);
>> fail_sysfs:
>> fail_throttle_thermal_policy:
>> +fail_throttle_fan_curve:
>> fail_platform_profile_setup:
>> if (asus->platform_profile_support)
>> platform_profile_remove();
>> diff --git a/include/linux/platform_data/x86/asus-wmi.h
>> b/include/linux/platform_data/x86/asus-wmi.h
>> index 17dc5cb6f3f2..a571b47ff362 100644
>> --- a/include/linux/platform_data/x86/asus-wmi.h
>> +++ b/include/linux/platform_data/x86/asus-wmi.h
>> @@ -77,6 +77,8 @@
>> #define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011
>> #define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 /*
>> deprecated */
>> #define ASUS_WMI_DEVID_CPU_FAN_CTRL 0x00110013
>> +#define ASUS_WMI_DEVID_CPU_FAN_CURVE 0x00110024
>> +#define ASUS_WMI_DEVID_GPU_FAN_CURVE 0x00110025
>>
>> /* Power */
>> #define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012
>
>


\
 
 \ /
  Last update: 2021-08-20 12:35    [W:0.068 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site