lkml.org 
[lkml]   [2021]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 2/2] arm64: dts: sparx5: Add the Sparx5 switch frame DMA support
Date
This adds the interrupt for the Sparx5 Frame DMA.

If this configuration is present the Sparx5 SwitchDev driver will use the
Frame DMA feature, and if not it will use register based injection and
extraction for sending and receiving frames to the CPU.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
---
arch/arm64/boot/dts/microchip/sparx5.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index ad07fff40544..787ebcec121d 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -471,8 +471,9 @@ switch: switch@0x600000000 {
<0x6 0x10004000 0x7fc000>,
<0x6 0x11010000 0xaf0000>;
reg-names = "cpu", "dev", "gcb";
- interrupt-names = "xtr";
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "xtr", "fdma";
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
resets = <&reset 0>;
reset-names = "switch";
};
--
2.32.0
\
 
 \ /
  Last update: 2021-08-19 09:41    [W:1.195 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site