lkml.org 
[lkml]   [2021]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/8] phy: phy-rockchip-inno-usb2: support #address_cells = 2
Date
New Rockchip devices have the usb phy nodes as standalone devices.
These nodes have register nodes with #address_cells = 2, but only use 32
bit addresses.

Adjust the driver to check if the returned address is "0", and adjust
the index in that case.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index beacac1dd253..5d2916143df7 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1098,12 +1098,21 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
rphy->usbgrf = NULL;
}

- if (of_property_read_u32(np, "reg", &reg)) {
+ if (of_property_read_u32_index(np, "reg", 0, &reg)) {
dev_err(dev, "the reg property is not assigned in %pOFn node\n",
np);
return -EINVAL;
}

+ /* support address_cells=2 */
+ if (reg == 0) {
+ if (of_property_read_u32_index(np, "reg", 1, &reg)) {
+ dev_err(dev, "the reg property is not assigned in %pOFn node\n",
+ np);
+ return -EINVAL;
+ }
+ }
+
rphy->dev = dev;
phy_cfgs = match->data;
rphy->chg_state = USB_CHG_STATE_UNDEFINED;
--
2.25.1
\
 
 \ /
  Last update: 2021-08-12 22:43    [W:0.114 / U:1.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site