lkml.org 
[lkml]   [2021]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/4] drm/bridge: ti-sn65dsi86: Implement bridge->mode_valid()
Hi Rob,

On Thu, Aug 12, 2021 at 12:09:12PM -0700, Rob Clark wrote:
> On Thu, Aug 12, 2021 at 11:44 AM Laurent Pinchart wrote:
> > On Wed, Aug 11, 2021 at 04:52:49PM -0700, Rob Clark wrote:
> > > From: Rob Clark <robdclark@chromium.org>
> > >
> > > For the brave new world of bridges not creating their own connectors, we
> > > need to implement the max clock limitation via bridge->mode_valid()
> > > instead of connector->mode_valid().
> > >
> > > Signed-off-by: Rob Clark <robdclark@chromium.org>
> > > ---
> > > drivers/gpu/drm/bridge/ti-sn65dsi86.c | 24 +++++++++++++++++++-----
> > > 1 file changed, 19 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > > index 5d3b30b2f547..38dcc49eccaf 100644
> > > --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > > +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > > @@ -595,6 +595,15 @@ static struct auxiliary_driver ti_sn_aux_driver = {
> > > .id_table = ti_sn_aux_id_table,
> > > };
> > >
> > > +static enum drm_mode_status check_mode(const struct drm_display_mode *mode)
> > > +{
> > > + /* maximum supported resolution is 4K at 60 fps */
> > > + if (mode->clock > 594000)
> > > + return MODE_CLOCK_HIGH;
> > > +
> > > + return MODE_OK;
> > > +}
> > > +
> > > /* -----------------------------------------------------------------------------
> > > * DRM Connector Operations
> > > */
> > > @@ -616,11 +625,7 @@ static enum drm_mode_status
> > > ti_sn_bridge_connector_mode_valid(struct drm_connector *connector,
> > > struct drm_display_mode *mode)
> > > {
> > > - /* maximum supported resolution is 4K at 60 fps */
> > > - if (mode->clock > 594000)
> > > - return MODE_CLOCK_HIGH;
> > > -
> > > - return MODE_OK;
> > > + return check_mode(mode);
> >
> > Do we need to implement the connector .mode_valid() operation, given
> > that the bridge is linked in the chain ?
>
> My understanding is that we need to keep it for display drivers that
> are not converted to NO_CONNECTOR..
>
> But AFAIK snapdragon is the only upstream user of this bridge, so
> after the drm/msm/dsi patch lands we could probably garbage collect
> the connector support.

Even in the !NO_CONNECTOR case, the bridge will still be linked in the
chain, so the atomic helpers should call the bridge .mode_valid() in
addition to the connector .mode_valid(). I think the connector operation
is redundant.

> > > }
> > >
> > > static struct drm_connector_helper_funcs ti_sn_bridge_connector_helper_funcs = {
> > > @@ -763,6 +768,14 @@ static void ti_sn_bridge_detach(struct drm_bridge *bridge)
> > > drm_dp_aux_unregister(&bridge_to_ti_sn65dsi86(bridge)->aux);
> > > }
> > >
> > > +static enum drm_mode_status
> > > +ti_sn_bridge_mode_valid(struct drm_bridge *bridge,
> > > + const struct drm_display_info *info,
> > > + const struct drm_display_mode *mode)
> > > +{
> > > + return check_mode(mode);
> > > +}
> > > +
> > > static void ti_sn_bridge_disable(struct drm_bridge *bridge)
> > > {
> > > struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge);
> > > @@ -1118,6 +1131,7 @@ static void ti_sn_bridge_post_disable(struct drm_bridge *bridge)
> > > static const struct drm_bridge_funcs ti_sn_bridge_funcs = {
> > > .attach = ti_sn_bridge_attach,
> > > .detach = ti_sn_bridge_detach,
> > > + .mode_valid = ti_sn_bridge_mode_valid,
> > > .pre_enable = ti_sn_bridge_pre_enable,
> > > .enable = ti_sn_bridge_enable,
> > > .disable = ti_sn_bridge_disable,

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2021-08-12 21:19    [W:0.071 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site