lkml.org 
[lkml]   [2021]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 0/6] clk: qcom: use power-domain for sm8250's clock controllers
On Tue, 27 Jul 2021 at 22:20, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On SM8250 both the display and video clock controllers are powered up by
> the MMCX power domain. Handle this by linking clock controllers to the
> proper power domain, and using runtime power management to enable and
> disable the MMCX power domain.
>
> Dependencies:
> - https://lore.kernel.org/linux-arm-msm/20210703005416.2668319-1-bjorn.andersson@linaro.org/
> (pending)
>
> Changes since v5:
> - Dropped devm_pm_runtime_enable callback to remove extra dependency
>
> Changes since v4:
> - Dropped pm_runtime handling from drivers/clk/qcom/common.c Moved the
> code into dispcc-sm8250.c and videocc-sm8250.c
>
> Changes since v3:
> - Wrap gdsc_enable/gdsc_disable into pm_runtime_get/put calls rather
> than calling pm_runtime_get in gdsc_enabled and _put in gdsc_disable
> - Squash gdsc patches together to remove possible dependencies between
> two patches.
>
> Changes since v2:
> - Move pm_runtime calls from generic genpd code to the gdsc code for
> now (as suggested by Ulf & Bjorn)
>
> Changes since v1:
> - Rebase on top of Bjorn's patches, removing the need for setting
> performance state directly.
> - Move runtime PM calls from GDSC code to generic genpd code.
> - Always call pm_runtime_enable in the Qualcomm generic clock
> controller code.
> - Register GDSC power domains as subdomains of the domain powering the
> clock controller if there is one.
>
> ----------------------------------------------------------------
> Dmitry Baryshkov (8):
> dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain
> dt-bindings: clock: qcom,videocc: add mmcx power domain
> clk: qcom: dispcc-sm8250: use runtime PM for the clock controller
> clk: qcom: videocc-sm8250: use runtime PM for the clock controller
> clk: qcom: gdsc: enable optional power domain support
> arm64: dts: qcom: sm8250: remove mmcx regulator
> clk: qcom: dispcc-sm8250: stop using mmcx regulator
> clk: qcom: videocc-sm8250: stop using mmcx regulator
>
> .../bindings/clock/qcom,dispcc-sm8x50.yaml | 7 +++
> .../devicetree/bindings/clock/qcom,videocc.yaml | 7 +++
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 11 +---
> drivers/clk/qcom/dispcc-sm8250.c | 28 ++++++++--
> drivers/clk/qcom/gdsc.c | 59 ++++++++++++++++++++--
> drivers/clk/qcom/gdsc.h | 2 +
> drivers/clk/qcom/videocc-sm8250.c | 31 +++++++++---
> 7 files changed, 124 insertions(+), 21 deletions(-)
>

For the series:

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

\
 
 \ /
  Last update: 2021-08-10 13:13    [W:0.085 / U:1.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site