lkml.org 
[lkml]   [2021]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] gpu/drm: ingenic: Add workaround for disabled drivers
Hi Daniel,

Le mar., août 10 2021 at 11:35:43 +0200, Daniel Vetter
<daniel@ffwll.ch> a écrit :
> On Fri, Aug 06, 2021 at 01:01:33PM +0200, Paul Cercueil wrote:
>> Hi Greg,
>>
>> Le ven., août 6 2021 at 12:17:55 +0200, Greg Kroah-Hartman
>> <gregkh@linuxfoundation.org> a écrit :
>> > On Thu, Aug 05, 2021 at 10:05:27PM +0200, Paul Cercueil wrote:
>> > > Hi Greg,
>> > >
>> > > Le jeu., août 5 2021 at 21:35:34 +0200, Greg Kroah-Hartman
>> > > <gregkh@linuxfoundation.org> a écrit :
>> > > > On Thu, Aug 05, 2021 at 09:21:09PM +0200, Paul Cercueil
>> wrote:
>> > > > > When the drivers of remote devices (e.g. HDMI chip) are
>> > > disabled in
>> > > > > the
>> > > > > config, we want the ingenic-drm driver to be able to probe
>> > > > > nonetheless
>> > > > > with the other devices (e.g. internal LCD panel) that are
>> > > enabled.
>> > > > >
>> > > > > Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> > > > > ---
>> > > > > drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 12
>> ++++++++++++
>> > > > > 1 file changed, 12 insertions(+)
>> > > > >
>> > > > > diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> > > > > b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> > > > > index d261f7a03b18..5e1fdbb0ba6b 100644
>> > > > > --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> > > > > +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> > > > > @@ -1058,6 +1058,18 @@ static int ingenic_drm_bind(struct
>> > > device
>> > > > > *dev, bool has_components)
>> > > > > for (i = 0; ; i++) {
>> > > > > ret = drm_of_find_panel_or_bridge(dev->of_node, 0, i,
>> > > &panel,
>> > > > > &bridge);
>> > > > > if (ret) {
>> > > > > + /*
>> > > > > + * Workaround for the case where the drivers for the
>> > > > > + * remote devices are not enabled. When that happens,
>> > > > > + * drm_of_find_panel_or_bridge() returns -EPROBE_DEFER
>> > > > > + * endlessly, which prevents the ingenic-drm driver
>> from
>> > > > > + * working at all.
>> > > > > + */
>> > > > > + if (ret == -EPROBE_DEFER) {
>> > > > > + ret = driver_deferred_probe_check_state(dev);
>> > > > > + if (ret == -ENODEV || ret == -ETIMEDOUT)
>> > > > > + continue;
>> > > > > + }
>> > > >
>> > > > So you are mucking around with devices on other busses
>> within this
>> > > > driver? What could go wrong? :(
>> > >
>> > > I'm doing the same thing as everybody else. This is the DRM
>> driver,
>> > > and
>> > > there is a driver for the external HDMI chip which gives us a
>> DRM
>> > > bridge
>> > > that we can obtain from the device tree.
>> >
>> > But then why do you need to call this function that is there for
>> a bus,
>> > not for a driver.
>>
>> The documentation disagrees with you :)
>>
>> And, if that has any weight, this solution was proposed by Rob.
>>
>> > > > Please use the existing driver core functionality for this
>> type of
>> > > > thing, it is not unique, no need for this function to be
>> called.
>> > >
>> > > I'm not sure you understand what I'm doing here. This driver
>> calls
>> > > drm_of_find_panel_or_bridge(), without guarantee that the
>> driver
>> > > for the
>> > > remote device (connected via DT graph) has been enabled in the
>> > > kernel
>> > > config. In that case it will always return -EPROBE_DEFER and
>> the
>> > > ingenic-drm
>> > > driver will never probe.
>> > >
>> > > This patch makes sure that the driver can probe if the HDMI
>> driver
>> > > has been
>> > > disabled in the kernel config, nothing more.
>> >
>> > That should not be an issue as you do not care if the config is
>> enabled,
>> > you just want to do something in the future if the driver shows
>> up,
>> > right?
>>
>> Well, the DRM subsystem doesn't really seem to handle hotplug of
>> hardware.
>> Right now all the drivers for the connected hardware need to probe
>> before
>> the main DRM driver. So I need to know that a remote device
>> (connected via
>> DT graph) will never probe.
>>
>> Give me a of_graph_remote_device_driver_will_never_probe() and I'll
>> use
>> that.
>>
>> > Much like the device link code, have you looked at that?
>>
>> I don't see how that would help in any way. The device link code
>> would allow
>> me to set a dependency between the remote hardware (HDMI chip,
>> provider) and
>> the LCD controller (consumer), but I already have that dependency
>> though the
>> DT graph. What I need is a way for the consumer to continue probing
>> if the
>> provider is not going to probe.
>
> Is this actually a legit use-case?
>
> Like you have hw with a bunch of sub-devices linked, and you decided
> to
> disable some of them, which makes the driver not load.

Yes. I'm facing that issue with a board that has a LCD panel and a HDMI
controller (IT66121). I have a "flasher" program for all the Ingenic
boards, that's basically just a Linux kernel + initramfs booted over
USB (device). I can't realistically enable every single driver for all
the hardware that's on these boards while still having a tiny
footprint. And I shouldn't have to care about it either.

> Why should we care? Is that hdmi driver really that big that we have
> to
> support this use-case?

DRM maintainers work with what embedded devs would call "infinite
resources". It annoys me that CONFIG_DRM pulls the I2C code even though
I may just have a LCD panel, and it annoys me that I have to enable
support for hardware that I'm not even planning to use, just so that
the DRM driver works for the hardware I do want to use.

> I know it's possible to do this, that doesn't mean it's a good idea.
> There's inifinitely more randconfigs that don't boot on my machine
> here
> for various reasons than the ones that do boot. We don't have "fixes"
> for
> all of these to make things still work, despite user misconfiguring
> their
> kernel.

I understand, you can't really expect random configs to work every
time. But it should still be possible to disable drivers for *optional*
hardware in the config and end up with a working system.

Cheers,
-Paul


\
 
 \ /
  Last update: 2021-08-10 12:34    [W:0.084 / U:1.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site