lkml.org 
[lkml]   [2021]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/5] powerpc: wii.dts: Reduce the size of the control area
Date
This is wrong, but needed in order to avoid overlapping ranges with the
OTP area added in the next commit. A refactor of this part of the
device tree is needed: according to Wiibrew[1], this area starts at
0x0d800000 and spans 0x400 bytes (that is, 0x100 32-bit registers),
encompassing PIC and GPIO registers, amongst the ones already exposed in
this device tree, which should become children of the control@d800000
node.

[1] https://wiibrew.org/wiki/Hardware/Hollywood_Registers

Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
---
arch/powerpc/boot/dts/wii.dts | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts
index aaa381da1906..c5fb54f8cc02 100644
--- a/arch/powerpc/boot/dts/wii.dts
+++ b/arch/powerpc/boot/dts/wii.dts
@@ -216,7 +216,13 @@ AVE: audio-video-encoder@70 {

control@d800100 {
compatible = "nintendo,hollywood-control";
- reg = <0x0d800100 0x300>;
+ /*
+ * Both the address and length are wrong, according to
+ * Wiibrew this should be <0x0d800000 0x400>, but it
+ * requires refactoring the PIC1 and GPIO nodes before
+ * changing that.
+ */
+ reg = <0x0d800100 0xa0>;
};

disk@d806000 {
--
2.32.0
\
 
 \ /
  Last update: 2021-08-01 09:39    [W:0.179 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site