Messages in this thread Patch in this message | | | From | Joakim Zhang <> | Subject | [PATCH V1 1/5] dt-bindings: fec: add the missing clocks properties | Date | Fri, 9 Jul 2021 15:53:51 +0800 |
| |
From: Fugang Duan <fugang.duan@nxp.com>
Both driver and dts have already used these clocks properties, so add the missing clocks info.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> --- Documentation/devicetree/bindings/net/fsl-fec.txt | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 9b543789cd52..6754be1b91c4 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -39,6 +39,17 @@ Optional properties: tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII interrupts. For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse per second interrupt associated with 1588 precision time protocol(PTP). +- clocks: Phandles to input clocks. +- clock-name: Should be the names of the clocks + - "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing. + - "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock. + - "ptp"(option), for IEEE1588 timer clock that requires the clock. + - "enet_clk_ref"(option), for MAC transmit/receiver reference clock like + RGMII TXC clock or RMII reference clock. It depends on board design, + the clock is required if RGMII TXC and RMII reference clock source from + SOC internal PLL. + - "enet_out"(option), output clock for external device, like supply clock + for PHY. The clock is required if PHY clock source from SOC. Optional subnodes: - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes -- 2.17.1
| |