lkml.org 
[lkml]   [2021]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRE: [PATCH v1 4/4] dt-bindings: iio: adc: ad7949: add adi,reference-source
From
On Fri Jul 9, 2021 at 4:15 AM EDT, Sa, Nuno wrote:
>
>
> > -----Original Message-----
> > From: Liam Beguin <liambeguin@gmail.com>
> > Sent: Friday, July 9, 2021 1:56 AM
> > To: liambeguin@gmail.com; lars@metafoo.de; Hennerich, Michael
> > <Michael.Hennerich@analog.com>; jic23@kernel.org; charles-
> > antoine.couret@essensium.com
> > Cc: linux-kernel@vger.kernel.org; linux-iio@vger.kernel.org;
> > devicetree@vger.kernel.org; robh+dt@kernel.org
> > Subject: [PATCH v1 4/4] dt-bindings: iio: adc: ad7949: add
> > adi,reference-source
> >
> > [External]
> >
> > From: Liam Beguin <lvb@xiphos.com>
> >
> > Add bindings documentation for the adi,reference-source property.
> > This property is required to properly configure the ADC sample request
> > based on which reference source should be used for the calculation.
> >
> > Signed-off-by: Liam Beguin <lvb@xiphos.com>
> > ---
> > .../bindings/iio/adc/adi,ad7949.yaml | 22 +++++++++++++++++++
> > 1 file changed, 22 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
> > b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
> > index 9b56bd4d5510..3f4629281cc8 100644
> > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
> > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
> > @@ -35,6 +35,28 @@ properties:
> > "#io-channel-cells":
> > const: 1
> >
> > + adi,reference-select:
> > + allOf:
> > + - $ref: /schemas/types.yaml#/definitions/uint32
> > + - enum: [0, 1, 2, 3, 6, 7]
> > +
> > + default: 7
> > + description: |
> > + Select the reference voltage source to use when converting
> > samples.
> > + Acceptable values are:
> > + - 0: Internal reference and temperature sensor enabled.
> > + Vref=2.5V, buffered output
> > + - 1: Internal reference and temperature sensor enabled.
> > + Vref=4.096V, buffered output
> > + - 2: Use external reference, temperature sensor enabled.
> > + Internal buffer disabled
> > + - 3: Use external reference, internal buffer and temperature
> > sensor
> > + enabled.
> > + - 6: Use external reference, internal buffer and temperature
> > sensor
> > + disabled.
> > + - 7: Use external reference, internal buffer enabled.
> > + Internal reference and temperature sensor disabled.
>
> I think typically the description comes first. I also don't think you
> need the 'allOf'(not even sure if it will pass the binding check)...
> Just have '$ref' and 'enum' on the same level.
>

I realize I misread your comment on the order of the description. I'll
move it at the top of the binding definition.

Liam

> - Nuno Sá
>
> > required:
> > - compatible
> > - reg
> > --
> > 2.30.1.489.g328c10930387

\
 
 \ /
  Last update: 2021-07-09 16:29    [W:2.353 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site