lkml.org 
[lkml]   [2021]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] x86/sgx: Add hook to error injection address validation
Date
SGX reserved memory does not appear in the standard address maps.

Add hook to call into the SGX code to check if an address is located
in SGX memory.

There are other challenges in injecting errors into SGX. Update the
documentation with a sequence of operations to inject.

Signed-off-by: Tony Luck <tony.luck@intel.com>
---
.../firmware-guide/acpi/apei/einj.rst | 19 +++++++++++++++++++
drivers/acpi/apei/einj.c | 3 ++-
include/linux/mm.h | 6 ++++++
3 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst
index c042176e1707..55e2331a6438 100644
--- a/Documentation/firmware-guide/acpi/apei/einj.rst
+++ b/Documentation/firmware-guide/acpi/apei/einj.rst
@@ -181,5 +181,24 @@ You should see something like this in dmesg::
[22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0
[22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0)

+Special notes for injection into SGX enclaves:
+
+There may be a separate BIOS setup option to enable SGX injection.
+
+The injection process consists of setting some special memory controller
+trigger that will inject the error on the next write to the target
+address. But the h/w prevents any software outside of an SGX enclave
+from accessing enclave pages (even BIOS SMM mode).
+
+The following sequence can be used:
+ 1) Determine physical address of enclave page
+ 2) Use "notrigger=1" mode to inject (this will setup
+ the injection address, but will not actually inject)
+ 3) Enter the enclave
+ 4) Store data to the virtual address matching physical address from step 1
+ 5) Execute CLFLUSH for that virtual address
+ 6) Spin delay for 250ms
+ 7) Read from the virtual address. This will trigger the error
+
For more information about EINJ, please refer to ACPI specification
version 4.0, section 17.5 and ACPI 5.0, section 18.6.
diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c
index 328e8aeece6c..fb634219e232 100644
--- a/drivers/acpi/apei/einj.c
+++ b/drivers/acpi/apei/einj.c
@@ -544,7 +544,8 @@ static int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2,
((region_intersects(base_addr, size, IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE)
!= REGION_INTERSECTS) &&
(region_intersects(base_addr, size, IORESOURCE_MEM, IORES_DESC_PERSISTENT_MEMORY)
- != REGION_INTERSECTS)))
+ != REGION_INTERSECTS) &&
+ !sgx_is_epc_page(base_addr)))
return -EINVAL;

inject:
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 1b9d0912942a..47eb960516cf 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -3253,11 +3253,17 @@ static inline int seal_check_future_write(int seals, struct vm_area_struct *vma)

#ifdef CONFIG_X86_SGX
int sgx_memory_failure(unsigned long pfn, int flags);
+bool sgx_is_epc_page(u64 paddr);
#else
static inline int sgx_memory_failure(unsigned long pfn, int flags)
{
return -ENXIO;
}
+
+static inline bool sgx_is_epc_page(u64 paddr)
+{
+ return false;
+}
#endif

#endif /* __KERNEL__ */
--
2.29.2
\
 
 \ /
  Last update: 2021-07-08 20:15    [W:0.307 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site