lkml.org 
[lkml]   [2021]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] media: rc: introduce Meson IR blaster driver
On Wed, Jul 07, 2021 at 05:13:23PM +0300, Viktor Prutyanov wrote:
> This patch adds the driver for Amlogic Meson IR blaster.
>
> Some Amlogic SoCs such as A311D and T950D4 have IR transmitter
> (blaster) controller onboard. It is capable of sending IR
> signals with arbitrary carrier frequency and duty cycle.
>
> The driver supports 3 modulation clock sources:
> - sysclk
> - xtal3 clock (xtal divided by 3)
> - 1us clock
>
> Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
> ---
> changes in v2:
> - threaded IRQ removed, all stuff done in IRQ handler
> - DIV_ROUND_CLOSEST_ULL replaced with DIV_ROUND_CLOSEST
> - compatible changed to "amlogic,meson-g12a-irblaster"
> - 'debug' parameter removed
> - dprintk() replaced with dev_dbg()/dev_info()
> - carrier frequency checked against 0
> - device_name added
>
> drivers/media/rc/Kconfig | 10 +
> drivers/media/rc/Makefile | 1 +
> drivers/media/rc/meson-irblaster.c | 439 +++++++++++++++++++++++++++++
> 3 files changed, 450 insertions(+)
> create mode 100644 drivers/media/rc/meson-irblaster.c
>
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index d0a8326b75c2..6e60348e1bcf 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -246,6 +246,16 @@ config IR_MESON
> To compile this driver as a module, choose M here: the
> module will be called meson-ir.
>
> +config IR_MESON_IRBLASTER
> + tristate "Amlogic Meson IR blaster"
> + depends on ARCH_MESON || COMPILE_TEST
> + help
> + Say Y if you want to use the IR blaster available on
> + Amlogic Meson SoCs.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called meson-irblaster.
> +
> config IR_MTK
> tristate "Mediatek IR remote receiver"
> depends on ARCH_MEDIATEK || COMPILE_TEST
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index 692e9b6b203f..b108f2b0420c 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
> obj-$(CONFIG_IR_MCEUSB) += mceusb.o
> obj-$(CONFIG_IR_FINTEK) += fintek-cir.o
> obj-$(CONFIG_IR_MESON) += meson-ir.o
> +obj-$(CONFIG_IR_MESON_IRBLASTER) += meson-irblaster.o
> obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
> obj-$(CONFIG_IR_ENE) += ene_ir.o
> obj-$(CONFIG_IR_REDRAT3) += redrat3.o
> diff --git a/drivers/media/rc/meson-irblaster.c b/drivers/media/rc/meson-irblaster.c
> new file mode 100644
> index 000000000000..bfcdf47e2100
> --- /dev/null
> +++ b/drivers/media/rc/meson-irblaster.c
> @@ -0,0 +1,439 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/**
> + * meson-irblaster.c - Amlogic Meson IR blaster driver
> + *
> + * Copyright (c) 2021, SberDevices. All Rights Reserved.
> + *
> + * Author: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; version 2 of the License and no later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
> + * NON INFRINGEMENT. See the GNU General Public License for more
> + * details.
> + *
> + * The full GNU General Public License is included in this distribution in
> + * the file called "COPYING".
> + */
> +
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/sched.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/interrupt.h>
> +#include <linux/spinlock.h>
> +#include <linux/of_irq.h>
> +#include <linux/clk.h>
> +#include <linux/slab.h>
> +#include <media/rc-core.h>
> +
> +#define DEVICE_NAME "Meson IR blaster"
> +#define DRIVER_NAME "meson-irblaster"
> +
> +#define IRB_DEFAULT_CARRIER 38000
> +#define IRB_DEFAULT_DUTY_CYCLE 50
> +
> +#define IRB_FIFO_LEN 128
> +#define IRB_DEFAULT_MAX_FIFO_LEVEL 96
> +
> +#define IRB_ADDR0 0x0
> +#define IRB_ADDR1 0x4
> +#define IRB_ADDR2 0x8
> +#define IRB_ADDR3 0xc
> +
> +#define IRB_MAX_DELAY (1 << 10)
> +#define IRB_DELAY_MASK (IRB_MAX_DELAY - 1)
> +
> +/* IRCTRL_IR_BLASTER_ADDR0 */
> +#define IRB_MOD_CLK(x) ((x) << 12)
> +#define IRB_MOD_SYS_CLK 0
> +#define IRB_MOD_XTAL3_CLK 1
> +#define IRB_MOD_1US_CLK 2
> +#define IRB_MOD_10US_CLK 3
> +#define IRB_INIT_HIGH BIT(2)
> +#define IRB_ENABLE BIT(0)
> +
> +/* IRCTRL_IR_BLASTER_ADDR2 */
> +#define IRB_MOD_COUNT(lo, hi) ((((lo) - 1) << 16) | ((hi) - 1))
> +
> +/* IRCTRL_IR_BLASTER_ADDR2 */
> +#define IRB_WRITE_FIFO BIT(16)
> +#define IRB_MOD_ENABLE BIT(12)
> +#define IRB_TB_1US (0x0 << 10)
> +#define IRB_TB_10US (0x1 << 10)
> +#define IRB_TB_100US (0x2 << 10)
> +#define IRB_TB_MOD_CLK (0x3 << 10)
> +
> +/* IRCTRL_IR_BLASTER_ADDR3 */
> +#define IRB_FIFO_THD_PENDING BIT(16)
> +#define IRB_FIFO_IRQ_ENABLE BIT(8)
> +
> +static unsigned int max_fifo_level = IRB_DEFAULT_MAX_FIFO_LEVEL;
> +module_param(max_fifo_level, uint, 0444);
> +MODULE_PARM_DESC(max_fifo_level, "Max blaster FIFO filling level");

As discussed device tree might be a better place for this.
> +
> +struct irblaster_dev {
> + struct device *dev;
> + unsigned int irq;

irq is not used after probe, no need for it here.

> + void __iomem *reg_base;
> + u32 *buf;
> + unsigned int buf_len;
> + unsigned int buf_head;
> + unsigned int carrier;
> + unsigned int duty_cycle;
> + spinlock_t lock;
> + struct completion completion;
> + unsigned int max_fifo_level;
> + unsigned int clk_nr;

clk_nr is not used after probe, no need for it here.

> + unsigned long clk_rate;
> +};
> +
> +static void irb_set_mod(struct irblaster_dev *irb)
> +{
> + unsigned int cnt = irb->clk_rate / irb->carrier;
> + unsigned int pulse_cnt = cnt * irb->duty_cycle / 100;

Should these two be DIV_ROUND_CLOSEST()?

> + unsigned int space_cnt = cnt - pulse_cnt;
> +
> + dev_dbg(irb->dev, "F_mod = %uHz, T_mod = %luns, duty_cycle = %u%%\n",
> + irb->carrier, NSEC_PER_SEC / irb->clk_rate * cnt,
> + 100 * pulse_cnt / cnt);
> +
> + writel(IRB_MOD_COUNT(pulse_cnt, space_cnt),
> + irb->reg_base + IRB_ADDR1);
> +}
> +
> +static void irb_setup(struct irblaster_dev *irb)
> +{
> + unsigned int fifo_irq_threshold = IRB_FIFO_LEN - irb->max_fifo_level;
> +
> + /*
> + * Disable the blaster, set modulator clock tick and set initialize
> + * output to be high. Set up carrier frequency and duty cycle. Then
> + * unset initialize output. Enable FIFO interrupt, set FIFO interrupt
> + * threshold. Finally, enable the blaster back.
> + */
> + writel(~IRB_ENABLE & (IRB_MOD_CLK(irb->clk_nr) | IRB_INIT_HIGH),
> + irb->reg_base + IRB_ADDR0);
> + irb_set_mod(irb);
> + writel(readl(irb->reg_base + IRB_ADDR0) & ~IRB_INIT_HIGH,
> + irb->reg_base + IRB_ADDR0);
> + writel(IRB_FIFO_IRQ_ENABLE | fifo_irq_threshold,
> + irb->reg_base + IRB_ADDR3);
> + writel(readl(irb->reg_base + IRB_ADDR0) | IRB_ENABLE,
> + irb->reg_base + IRB_ADDR0);
> +}
> +
> +static u32 irb_prepare_pulse(struct irblaster_dev *irb, unsigned int time)
> +{
> + unsigned int delay;
> + unsigned int tb = IRB_TB_MOD_CLK;
> + unsigned int tb_us = USEC_PER_SEC / irb->carrier;

DIV_ROUND_CLOSEST()?

> +
> + delay = (DIV_ROUND_CLOSEST(time, tb_us) - 1) & IRB_DELAY_MASK;
> +
> + return ((IRB_WRITE_FIFO | IRB_MOD_ENABLE) | tb | delay);
> +}
> +
> +static u32 irb_prepare_space(struct irblaster_dev *irb, unsigned int time)
> +{
> + unsigned int delay;
> + unsigned int tb = IRB_TB_100US;
> + unsigned int tb_us = 100;
> +
> + if (time <= IRB_MAX_DELAY) {
> + tb = IRB_TB_1US;
> + tb_us = 1;
> + } else if (time <= 10 * IRB_MAX_DELAY) {
> + tb = IRB_TB_10US;
> + tb_us = 10;
> + } else if (time <= 100 * IRB_MAX_DELAY) {
> + tb = IRB_TB_100US;
> + tb_us = 100;
> + }
> +
> + delay = (DIV_ROUND_CLOSEST(time, tb_us) - 1) & IRB_DELAY_MASK;
> +
> + return ((IRB_WRITE_FIFO & ~IRB_MOD_ENABLE) | tb | delay);
> +}
> +
> +static void irb_send_buffer(struct irblaster_dev *irb)
> +{
> + unsigned long flags;
> + unsigned int nr = 0;
> +
> + spin_lock_irqsave(&irb->lock, flags);
> + while (irb->buf_head < irb->buf_len && nr < irb->max_fifo_level) {
> + writel(irb->buf[irb->buf_head], irb->reg_base + IRB_ADDR2);
> +
> + irb->buf_head++;
> + nr++;
> + }
> + spin_unlock_irqrestore(&irb->lock, flags);
> +}
> +
> +static bool irb_check_buf(struct irblaster_dev *irb,
> + unsigned int *buf, unsigned int len)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < len; i++) {
> + unsigned int max_tb_us;
> + /*
> + * Max space timebase is 100 us.
> + * Pulse timebase equals to carrier period.
> + */
> + if (i % 2 == 0)
> + max_tb_us = USEC_PER_SEC / irb->carrier;
> + else
> + max_tb_us = 100;
> +
> + if (buf[i] >= max_tb_us * IRB_MAX_DELAY)
> + return false;
> + }
> +
> + return true;
> +}
> +
> +static void irb_fill_buf(struct irblaster_dev *irb, unsigned int *buf)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < irb->buf_len; i++) {
> + if (i % 2 == 0)
> + irb->buf[i] = irb_prepare_pulse(irb, buf[i]);
> + else
> + irb->buf[i] = irb_prepare_space(irb, buf[i]);
> + }
> +}
> +
> +static void irb_send(struct irblaster_dev *irb)
> +{
> + reinit_completion(&irb->completion);
> +
> + dev_dbg(irb->dev, "tx started, buffer length = %u\n", len);
> + irb_send_buffer(irb);
> + wait_for_completion_interruptible(&irb->completion);
> + dev_dbg(irb->dev, "tx completed\n");
> +}

This function has only one call site and it is not very long. Might as well
inline it.

> +
> +static irqreturn_t irb_irqhandler(int irq, void *data)
> +{
> + struct irblaster_dev *irb = data;
> +
> + writel(readl(irb->reg_base + IRB_ADDR3) & ~IRB_FIFO_THD_PENDING,
> + irb->reg_base + IRB_ADDR3);
> +
> + if (irb->buf_head < irb->buf_len)
> + irb_send_buffer(irb);
> +
> + complete(&irb->completion);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int irb_set_tx_carrier(struct rc_dev *rc, u32 carrier)
> +{
> + struct irblaster_dev *irb = rc->priv;
> +
> + if (carrier == 0)
> + return -EINVAL;
> +
> + irb->carrier = carrier;
> + irb_set_mod(irb);
> +
> + return 0;
> +}
> +
> +static int irb_set_tx_duty_cycle(struct rc_dev *rc, u32 duty_cycle)
> +{
> + struct irblaster_dev *irb = rc->priv;
> +
> + irb->duty_cycle = duty_cycle;
> + irb_set_mod(irb);
> +
> + return 0;
> +}
> +
> +static int irb_tx_ir(struct rc_dev *rc, unsigned int *buf, unsigned int len)
> +{
> + struct irblaster_dev *irb = rc->priv;
> +
> + if (!irb_check_buf(irb, buf, len))
> + return -EINVAL;
> +
> + irb->buf = kmalloc_array(len, sizeof(u32), GFP_KERNEL);
> + if (!irb->buf)
> + return -ENOMEM;
> +
> + irb->buf_len = len;
> + irb->buf_head = 0;
> + irb_fill_buf(irb, buf);
> +
> + irb_send(irb);
> +

irb_send() does a wait interruptable, so it can be interrupted with a simple
signal ..

> + kfree(irb->buf);

.. and then we free memory which is being sent. I think you need to use
the spinlock here, free it and set the buf to NULL.

> +
> + return len;
> +}
> +
> +static int irb_mod_clock_probe(struct irblaster_dev *irb)
> +{
> + struct device_node *np = irb->dev->of_node;
> + struct clk *clock;
> + const char *clock_name;
> +
> + if (!np)
> + return -ENODEV;
> +
> + if (!of_property_read_string(np, "mod-clock", &clock_name)) {
> + if (!strcmp(clock_name, "sysclk"))
> + irb->clk_nr = IRB_MOD_SYS_CLK;
> + else if (!strcmp(clock_name, "xtal"))
> + irb->clk_nr = IRB_MOD_XTAL3_CLK;
> + else
> + return -EINVAL;
> +
> + clock = devm_clk_get(irb->dev, clock_name);
> + if (IS_ERR(clock) || clk_prepare_enable(clock))
> + return -ENODEV;
> + } else {
> + irb->clk_nr = IRB_MOD_1US_CLK;
> + }
> +
> + switch (irb->clk_nr) {
> + case IRB_MOD_SYS_CLK:
> + irb->clk_rate = clk_get_rate(clock);
> + break;
> + case IRB_MOD_XTAL3_CLK:
> + irb->clk_rate = clk_get_rate(clock) / 3;
> + break;
> + case IRB_MOD_1US_CLK:
> + irb->clk_rate = 1000000;
> + break;
> + }
> +
> + dev_info(irb->dev, "F_clk = %luHz\n", irb->clk_rate);
> +
> + return 0;
> +}
> +
> +static int __init irblaster_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct irblaster_dev *irb;
> + struct rc_dev *rc;
> + struct resource *range;
> + int ret;
> +
> + irb = devm_kzalloc(dev, sizeof(*irb), GFP_KERNEL);
> + if (!irb)
> + return -ENOMEM;
> +
> + range = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!range) {
> + dev_err(dev, "no memory resource found\n");
> + return -ENODEV;
> + }
> +
> + irb->reg_base = devm_ioremap_resource(dev, range);
> + if (IS_ERR(irb->reg_base)) {
> + dev_err(dev, "ioremap failed\n");
> + return PTR_ERR(irb->reg_base);
> + }
> +
> + irb->irq = platform_get_irq(pdev, 0);
> + if (irb->irq < 0) {
> + dev_err(dev, "no irq resource found\n");
> + return -ENODEV;
> + }
> +
> + if (max_fifo_level <= IRB_FIFO_LEN)
> + irb->max_fifo_level = max_fifo_level;
> + else {
> + irb->max_fifo_level = IRB_FIFO_LEN;
> + dev_warn(dev, "max FIFO level param truncated to %u",
> + IRB_FIFO_LEN);
> + }
> +
> + irb->dev = dev;
> + irb->carrier = IRB_DEFAULT_CARRIER;
> + irb->duty_cycle = IRB_DEFAULT_DUTY_CYCLE;
> + init_completion(&irb->completion);
> + spin_lock_init(&irb->lock);
> +
> + ret = irb_mod_clock_probe(irb);
> + if (ret) {
> + dev_err(dev, "modulator clock setup failed\n");
> + return ret;
> + }
> + irb_setup(irb);
> +
> + ret = devm_request_irq(dev, irb->irq,
> + irb_irqhandler,
> + IRQF_TRIGGER_RISING,
> + DRIVER_NAME, irb);
> + if (ret) {
> + dev_err(dev, "irq request failed\n");
> + return ret;
> + }
> +
> + rc = rc_allocate_device(RC_DRIVER_IR_RAW_TX);
> + if (!rc)
> + return -ENOMEM;
> +
> + rc->driver_name = DRIVER_NAME;
> + rc->device_name = DEVICE_NAME;
> + rc->priv = irb;
> +
> + rc->tx_ir = irb_tx_ir;
> + rc->s_tx_carrier = irb_set_tx_carrier;
> + rc->s_tx_duty_cycle = irb_set_tx_duty_cycle;
> +
> + ret = rc_register_device(rc);
> + if (ret < 0) {
> + dev_err(dev, "rc_dev registration failed\n");
> + rc_free_device(rc);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, rc);
> +
> + return 0;
> +}
> +
> +static int irblaster_remove(struct platform_device *pdev)
> +{
> + struct rc_dev *rc = platform_get_drvdata(pdev);
> +
> + rc_unregister_device(rc);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id irblaster_dt_match[] = {
> + {
> + .compatible = "amlogic,meson-g12a-irblaster",
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, irblaster_dt_match);
> +
> +static struct platform_driver irblaster_pd = {
> + .remove = irblaster_remove,
> + .driver = {
> + .name = DRIVER_NAME,
> + .owner = THIS_MODULE,
> + .of_match_table = irblaster_dt_match,
> + },
> +};
> +
> +module_platform_driver_probe(irblaster_pd, irblaster_probe);
> +
> +MODULE_DESCRIPTION("Meson IR blaster driver");
> +MODULE_AUTHOR("Viktor Prutyanov <viktor.prutyanov@phystech.edu>");
> +MODULE_LICENSE("GPL");
> --
> 2.21.0

Thanks

Sean

\
 
 \ /
  Last update: 2021-07-08 12:18    [W:0.951 / U:1.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site