lkml.org 
[lkml]   [2021]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 6/6] media: dt-bindings: mt9p031: Add missing required properties
Date
Add missing required clocks and supply regulator properties for the
sensor input clock and vdd, vdd_io and vaa supply regulators.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
.../bindings/media/i2c/aptina,mt9p031.yaml | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
index 7de62e339895..09560d97a59d 100644
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -24,6 +24,18 @@ properties:
description: I2C device address
maxItems: 1

+ clocks:
+ maxItems: 1
+
+ vdd-supply:
+ description: Digital supply voltage, 1.8 V
+
+ vdd_io-supply:
+ description: I/O supply voltage, 1.8 or 2.8 V
+
+ vaa-supply:
+ description: Analog supply voltage, 2.8 V
+
reset-gpios:
maxItems: 1
description: Chip reset GPIO
@@ -48,6 +60,10 @@ properties:
required:
- compatible
- reg
+ - clocks
+ - vdd-supply
+ - vdd_io-supply
+ - vaa-supply
- port

additionalProperties: false
@@ -63,6 +79,12 @@ examples:
reg = <0x5d>;
reset-gpios = <&gpio_sensor 0 0>;

+ clocks = <&sensor_clk>;
+
+ vdd-supply = <&reg_vdd>;
+ vdd_io-supply = <&reg_vdd_io>;
+ vaa-supply = <&reg_vaa>;
+
port {
mt9p031_1: endpoint {
input-clock-frequency = <6000000>;
--
2.25.1
\
 
 \ /
  Last update: 2021-07-08 11:21    [W:0.184 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site