lkml.org 
[lkml]   [2021]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [smartpqi updates PATCH 2/9] smartpqi: rm unsupported controller features msgs
    From
    Date
    Dear Kevin, dear Don,


    Am 06.07.21 um 20:16 schrieb Don Brace:
    > From: Kevin Barnett <kevin.barnett@microchip.com>
    >
    > Remove "Feature XYZ not supported by controller" messages.
    >
    > During driver initialization, the driver examines the PQI Table Feature bits.
    > These bits are used by the controller to advertise features supported by the
    > controller. For any features not supported by the controller, the driver would
    > display a message in the form:
    > "Feature XYZ not supported by controller"
    > Some of these "negative" messages were causing customer confusion.

    As it’s info log level and not warning or notice, these message are
    useful in my opinion. You could downgrade them to debug, but I do not
    see why. If customers do not want to see these info messages, they
    should filter them out.

    For completeness, is there an alternative to list the unsupported
    features from the firmware for example from sysfs?


    Kind regards,

    Paul


    > Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
    > Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
    > Reviewed-by: Scott Teel <scott.teel@microchip.com>
    > Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
    > Signed-off-by: Don Brace <don.brace@microchip.com>
    > ---
    > drivers/scsi/smartpqi/smartpqi_init.c | 5 +----
    > 1 file changed, 1 insertion(+), 4 deletions(-)
    >
    > diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
    > index d977c7b30d5c..7958316841a4 100644
    > --- a/drivers/scsi/smartpqi/smartpqi_init.c
    > +++ b/drivers/scsi/smartpqi/smartpqi_init.c
    > @@ -7255,11 +7255,8 @@ struct pqi_firmware_feature {
    > static void pqi_firmware_feature_status(struct pqi_ctrl_info *ctrl_info,
    > struct pqi_firmware_feature *firmware_feature)
    > {
    > - if (!firmware_feature->supported) {
    > - dev_info(&ctrl_info->pci_dev->dev, "%s not supported by controller\n",
    > - firmware_feature->feature_name);
    > + if (!firmware_feature->supported)
    > return;
    > - }
    >
    > if (firmware_feature->enabled) {
    > dev_info(&ctrl_info->pci_dev->dev,
    >

    \
     
     \ /
      Last update: 2021-07-07 09:28    [W:4.483 / U:0.044 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site