lkml.org 
[lkml]   [2021]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] regulator: rt5033: Use linear ranges to map all voltage selection
On Tue, 06 Jul 2021, cy_huang wrote:

> From: ChiYuan Huang <cy_huang@richtek.com>
>
> Instead of linear mapping, Use linear range to map all voltage selection.
>
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> ---
> Since v2
> - recover the volt number back in rt5033-private.h
> - Add the n_voltages from v1 back.
>
> Even though commit 6549c46af855 ("regulator: rt5033: Fix n_voltages settings for BUCK and LDO")
> can fix the linear mapping to the correct min/max voltage
> But there're still non-step ranges for the reserved value.
>
> To use the linear range can fix it for mapping all voltage selection.
> ---
> drivers/regulator/rt5033-regulator.c | 21 +++++++++++++++------

> include/linux/mfd/rt5033-private.h | 4 ++--

Acked-by: Lee Jones <lee.jones@linaro.org>

> 2 files changed, 17 insertions(+), 8 deletions(-)

--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2021-07-06 10:24    [W:0.058 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site