lkml.org 
[lkml]   [2021]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[smartpqi updates PATCH 4/9] smartpqi: add SCSI cmd info for resets
Date
From: Murthy Bhat <Murthy.Bhat@microchip.com>

Report on SCSI command that has triggered the reset.
- Also add check for 0 length SCSI commands.

Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
drivers/scsi/smartpqi/smartpqi_init.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 5ce1c41a758d..c2ddb66b5c2d 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -6033,8 +6033,10 @@ static int pqi_eh_device_reset_handler(struct scsi_cmnd *scmd)
mutex_lock(&ctrl_info->lun_reset_mutex);

dev_err(&ctrl_info->pci_dev->dev,
- "resetting scsi %d:%d:%d:%d\n",
- shost->host_no, device->bus, device->target, device->lun);
+ "resetting scsi %d:%d:%d:%d due to cmd 0x%02x\n",
+ shost->host_no,
+ device->bus, device->target, device->lun,
+ scmd->cmd_len > 0 ? scmd->cmnd[0] : 0xff);

pqi_check_ctrl_health(ctrl_info);
if (pqi_ctrl_offline(ctrl_info))
--
2.28.0.rc1.9.ge7ae437ac1
\
 
 \ /
  Last update: 2021-07-06 20:17    [W:2.213 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site