lkml.org 
[lkml]   [2021]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2] mmc: sdhci: Update the software timeout value for sdhc
On 2021-07-01 22:28, sbhanu@codeaurora.org wrote:
> On 2021-06-30 19:38, Adrian Hunter wrote:
>> On 27/06/21 5:40 pm, Shaik Sajida Bhanu wrote:
>>> Whenever SDHC run at clock rate 50MHZ or below, the hardware data
>>> timeout value will be 21.47secs, which is approx. 22secs and we have
>>> a current software timeout value as 10secs. We have to set software
>>> timeout value more than the hardware data timeout value to avioid
>>> seeing
>>> the below register dumps.
>>>
>>> [ 332.953670] mmc2: Timeout waiting for hardware interrupt.
>>> [ 332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP
>>> ===========
>>> [ 332.966450] mmc2: sdhci: Sys addr: 0x00000000 | Version:
>>> 0x00007202
>>> [ 332.973256] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt:
>>> 0x00000001
>>> [ 332.980054] mmc2: sdhci: Argument: 0x00000000 | Trn mode:
>>> 0x00000027
>>> [ 332.986864] mmc2: sdhci: Present: 0x01f801f6 | Host ctl:
>>> 0x0000001f
>>> [ 332.993671] mmc2: sdhci: Power: 0x00000001 | Blk gap:
>>> 0x00000000
>>> [ 333.000583] mmc2: sdhci: Wake-up: 0x00000000 | Clock:
>>> 0x00000007
>>> [ 333.007386] mmc2: sdhci: Timeout: 0x0000000e | Int stat:
>>> 0x00000000
>>> [ 333.014182] mmc2: sdhci: Int enab: 0x03ff100b | Sig enab:
>>> 0x03ff100b
>>> [ 333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int:
>>> 0x00000000
>>> [ 333.027771] mmc2: sdhci: Caps: 0x322dc8b2 | Caps_1:
>>> 0x0000808f
>>> [ 333.034561] mmc2: sdhci: Cmd: 0x0000183a | Max curr:
>>> 0x00000000
>>> [ 333.041359] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]:
>>> 0x00000000
>>> [ 333.048157] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]:
>>> 0x00000000
>>> [ 333.054945] mmc2: sdhci: Host ctl2: 0x00000000
>>> [ 333.059657] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr:
>>> 0x0000000ffffff218
>>> [ 333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
>>> -----------
>>> [ 333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
>>> 0x6000642c | DLL cfg2: 0x0020a000
>>> [ 333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
>>> 0x00000000 | DDR cfg: 0x80040873
>>> [ 333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
>>> 0xf88218a8 Vndr func3: 0x02626040
>>> [ 333.102371] mmc2: sdhci:
>>> ============================================
>>>
>>> So, set software timeout value more than hardware timeout value.
>>>
>>> Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
>>> ---
>>>
>>> Changes since V1:
>>> - Moved software data timeout update part to qcom specific file as
>>> suggested by Veerabhadrarao Badiganti.
>>> ---
>>> drivers/mmc/host/sdhci-msm.c | 9 +++++++++
>>> 1 file changed, 9 insertions(+)
>>>
>>> diff --git a/drivers/mmc/host/sdhci-msm.c
>>> b/drivers/mmc/host/sdhci-msm.c
>>> index e44b7a6..58e651e 100644
>>> --- a/drivers/mmc/host/sdhci-msm.c
>>> +++ b/drivers/mmc/host/sdhci-msm.c
>>> @@ -2089,6 +2089,14 @@ static void sdhci_msm_cqe_disable(struct
>>> mmc_host *mmc, bool recovery)
>>> sdhci_cqe_disable(mmc, recovery);
>>> }
>>>
>>> +static void sdhci_msm_set_timeout(struct sdhci_host *host, struct
>>> mmc_command *cmd)
>>> +{
>>> +
>>> + __sdhci_set_timeout(host, cmd);
>>> + if (cmd && (cmd->data) && (host->clock > 400000) && (host->clock <=
>>> 50000000))
>>
>> There are some redundant parenthesis there and cmd is never NULL i.e.
>> could be:
>>
>> if (cmd->data && host->clock > 400000 && host->clock <= 50000000)
> Sure
Hi,

We are passing cmd as NULL in sdhci_cqe_enable( ) for eMMC so, i think
we should check cmd.

Thanks,
Sajida
>>
>>> + host->data_timeout = 22 * NSEC_PER_SEC;
>>
>> That needs to be 22LL to make the compiler warning go away
>>
> Sure
>>> +}
>>> +
>>> static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
>>> .enable = sdhci_msm_cqe_enable,
>>> .disable = sdhci_msm_cqe_disable,
>>> @@ -2438,6 +2446,7 @@ static const struct sdhci_ops sdhci_msm_ops = {
>>> .irq = sdhci_msm_cqe_irq,
>>> .dump_vendor_regs = sdhci_msm_dump_vendor_regs,
>>> .set_power = sdhci_set_power_noreg,
>>> + .set_timeout = sdhci_msm_set_timeout,
>>> };
>>>
>>> static const struct sdhci_pltfm_data sdhci_msm_pdata = {
>>>

\
 
 \ /
  Last update: 2021-07-05 16:09    [W:0.151 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site