lkml.org 
[lkml]   [2021]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation
Date
From: Luka Kovacic <luka.kovacic@sartura.hr>

Add the iei-wt61p803-puzzle driver hwmon driver interface documentation.

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
---
.../hwmon/iei-wt61p803-puzzle-hwmon.rst | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst

diff --git a/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
new file mode 100644
index 000000000000..04b01e53760c
--- /dev/null
+++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver iei-wt61p803-puzzle-hwmon
+=======================================
+
+Supported chips:
+ * IEI WT61P803 PUZZLE for IEI Puzzle M801
+
+ Prefix: 'iei-wt61p803-puzzle-hwmon'
+
+Author: Luka Kovacic <luka.kovacic@sartura.hr>
+
+
+Description
+-----------
+
+This driver adds fan and temperature sensor reading for some IEI Puzzle
+series boards.
+
+Sysfs attributes
+----------------
+
+The following attributes are supported:
+
+- IEI WT61P803 PUZZLE for IEI Puzzle M801
+
+/sys files in hwmon subsystem
+-----------------------------
+
+================= == ===================================================
+fan[1-5]_input RO files for fan speed (in RPM)
+pwm[1-2] RW files for fan[1-2] target duty cycle (0..255)
+================= == ===================================================
+
+/sys files in thermal subsystem
+-------------------------------
+
+================= == ====================================================
+cur_state RW file for current cooling state of the cooling device
+ (0..max_state)
+max_state RO file for maximum cooling state of the cooling device
+================= == ====================================================
--
2.31.1
\
 
 \ /
  Last update: 2021-07-05 15:52    [W:0.145 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site