lkml.org 
[lkml]   [2021]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] [v2] mmc: sdhci-pci-gli: Improve Random 4K Read Performance of GL9763E
On Mon, 5 Jul 2021 at 11:00, Renius Chen <reniuschengl@gmail.com> wrote:
>
> During a sequence of random 4K read operations, the performance will be
> reduced due to spending much time on entering/exiting the low power state
> between requests. We disable the low power state negotiation of GL9763E
> during a sequence of random 4K read operations to improve the performance
> and enable it again after the operations have finished.
>
> Signed-off-by: Renius Chen <reniuschengl@gmail.com>
> ---
> drivers/mmc/host/sdhci-pci-gli.c | 68 ++++++++++++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index 302a7579a9b3..5f1f332b4241 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -88,6 +88,9 @@
> #define PCIE_GLI_9763E_SCR 0x8E0
> #define GLI_9763E_SCR_AXI_REQ BIT(9)
>
> +#define PCIE_GLI_9763E_CFG 0x8A0
> +#define GLI_9763E_CFG_LPSN_DIS BIT(12)
> +
> #define PCIE_GLI_9763E_CFG2 0x8A4
> #define GLI_9763E_CFG2_L1DLY GENMASK(28, 19)
> #define GLI_9763E_CFG2_L1DLY_MID 0x54
> @@ -128,6 +131,11 @@
>
> #define GLI_MAX_TUNING_LOOP 40
>
> +struct gli_host {
> + bool start_4k_r;
> + int continuous_4k_r;
> +};
> +
> /* Genesys Logic chipset */
> static inline void gl9750_wt_on(struct sdhci_host *host)
> {
> @@ -691,6 +699,62 @@ static void sdhci_gl9763e_dumpregs(struct mmc_host *mmc)
> sdhci_dumpregs(mmc_priv(mmc));
> }
>
> +static void gl9763e_set_low_power_negotiation(struct sdhci_pci_slot *slot, bool enable)
> +{
> + struct pci_dev *pdev = slot->chip->pdev;
> + u32 value;
> +
> + pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
> + value &= ~GLI_9763E_VHS_REV;
> + value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
> + pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
> +
> + pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG, &value);
> +
> + if (enable)
> + value &= ~GLI_9763E_CFG_LPSN_DIS;
> + else
> + value |= GLI_9763E_CFG_LPSN_DIS;
> +
> + pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG, value);
> +
> + pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
> + value &= ~GLI_9763E_VHS_REV;
> + value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
> + pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
> +}
> +
> +static void gl9763e_request(struct mmc_host *mmc, struct mmc_request *mrq)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + struct mmc_command *cmd;
> + struct sdhci_pci_slot *slot = sdhci_priv(host);
> + struct gli_host *gli_host = sdhci_pci_priv(slot);
> +
> + cmd = mrq->cmd;
> +
> + if (cmd && (cmd->opcode == MMC_READ_MULTIPLE_BLOCK) && (cmd->data->blocks == 8)) {
> + gli_host->continuous_4k_r++;
> +
> + if ((!gli_host->start_4k_r) && (gli_host->continuous_4k_r >= 3)) {
> + gl9763e_set_low_power_negotiation(slot, false);
> +
> + gli_host->start_4k_r = true;
> + }
> + } else {
> + gli_host->continuous_4k_r = 0;
> +
> + if (gli_host->start_4k_r) {
> + gl9763e_set_low_power_negotiation(slot, true);
> +
> + gli_host->start_4k_r = false;
> + }
> + }

The above code is trying to figure out what kind of storage use case
that is running, based on information about the buffers. This does not
work, simply because the buffers don't give you all the information
you need to make the right decisions.

Moreover, I am sure you would try to follow up with additional changes
on top, trying to tweak the behaviour to fit another use case - and so
on. My point is, this code doesn't belong in the lowest layer drivers.

To move forward, I suggest you explore using runtime PM in combination
with dev PM qos. In this way, the driver could implement a default
behaviour, which can be tweaked from upper layer governors for
example, but also from user space (via sysfs) allowing more
flexibility and potentially support for various more use cases.

> +
> + sdhci_request(mmc, mrq);
> +}
> +
> +
> static void sdhci_gl9763e_cqe_pre_enable(struct mmc_host *mmc)
> {
> struct cqhci_host *cq_host = mmc->cqe_private;
> @@ -848,6 +912,9 @@ static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
> gli_pcie_enable_msi(slot);
> host->mmc_host_ops.hs400_enhanced_strobe =
> gl9763e_hs400_enhanced_strobe;
> +
> + host->mmc_host_ops.request = gl9763e_request;
> +
> gli_set_gl9763e(slot);
> sdhci_enable_v4_mode(host);
>
> @@ -913,4 +980,5 @@ const struct sdhci_pci_fixes sdhci_gl9763e = {
> .suspend = sdhci_cqhci_gli_suspend,
> #endif
> .add_host = gl9763e_add_host,
> + .priv_size = sizeof(struct gli_host),
> };
> --

Kind regards
Uffe

\
 
 \ /
  Last update: 2021-07-05 12:06    [W:1.495 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site