lkml.org 
[lkml]   [2021]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 08/12] x86/sev: Park APs on AP Jump Table with GHCB protocol version 2
Date
From: Joerg Roedel <jroedel@suse.de>

GHCB protocol version 2 adds the MSR-based AP-reset-hold VMGEXIT which
does not need a GHCB. Use that to park APs in 16-bit protected mode on
the AP Jump Table.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
arch/x86/include/asm/realmode.h | 3 +
arch/x86/kernel/sev.c | 48 ++++++++++++++--
arch/x86/realmode/rm/Makefile | 11 ++--
arch/x86/realmode/rm/header.S | 3 +
arch/x86/realmode/rm/sev_ap_park.S | 89 ++++++++++++++++++++++++++++++
5 files changed, 144 insertions(+), 10 deletions(-)
create mode 100644 arch/x86/realmode/rm/sev_ap_park.S

diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index 29590a4ddf24..668de0a8b1ae 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -23,6 +23,9 @@ struct real_mode_header {
u32 trampoline_header;
#ifdef CONFIG_AMD_MEM_ENCRYPT
u32 sev_es_trampoline_start;
+ u32 sev_real_ap_park_asm;
+ u32 sev_real_ap_park_seg;
+ u32 sev_ap_park_gdt;
#endif
#ifdef CONFIG_X86_64
u32 trampoline_pgd;
diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c
index 0946ef732a62..2147ebd0e919 100644
--- a/arch/x86/kernel/sev.c
+++ b/arch/x86/kernel/sev.c
@@ -27,6 +27,7 @@
#include <asm/fpu/internal.h>
#include <asm/processor.h>
#include <asm/realmode.h>
+#include <asm/tlbflush.h>
#include <asm/traps.h>
#include <asm/svm.h>
#include <asm/smp.h>
@@ -695,6 +696,35 @@ static bool __init sev_es_setup_ghcb(void)
}

#ifdef CONFIG_HOTPLUG_CPU
+static void __noreturn sev_jumptable_ap_park(void)
+{
+ local_irq_disable();
+
+ write_cr3(real_mode_header->trampoline_pgd);
+
+ /* Exiting long mode will fail if CR4.PCIDE is set. */
+ if (boot_cpu_has(X86_FEATURE_PCID))
+ cr4_clear_bits(X86_CR4_PCIDE);
+
+ asm volatile("xorq %%r15, %%r15\n"
+ "xorq %%r14, %%r14\n"
+ "xorq %%r13, %%r13\n"
+ "xorq %%r12, %%r12\n"
+ "xorq %%r11, %%r11\n"
+ "xorq %%r10, %%r10\n"
+ "xorq %%r9, %%r9\n"
+ "xorq %%r8, %%r8\n"
+ "xorq %%rsi, %%rsi\n"
+ "xorq %%rdi, %%rdi\n"
+ "xorq %%rsp, %%rsp\n"
+ "xorq %%rbp, %%rbp\n"
+ "ljmpl *%0" : :
+ "m" (real_mode_header->sev_real_ap_park_asm),
+ "b" (sev_es_jump_table_pa >> 4));
+ unreachable();
+}
+STACK_FRAME_NON_STANDARD(sev_jumptable_ap_park);
+
static void sev_es_ap_hlt_loop(void)
{
struct ghcb_state state;
@@ -731,8 +761,10 @@ static void sev_es_play_dead(void)
play_dead_common();

/* IRQs now disabled */
-
- sev_es_ap_hlt_loop();
+ if (sev_ap_jumptable_blob_installed)
+ sev_jumptable_ap_park();
+ else
+ sev_es_ap_hlt_loop();

/*
* If we get here, the VCPU was woken up again. Jump to CPU
@@ -762,8 +794,9 @@ static inline void sev_es_setup_play_dead(void) { }
static void __init sev_es_setup_ap_jump_table_data(void *base, u32 pa)
{
struct sev_ap_jump_table_header *header;
+ u64 *ap_jumptable_gdt, *sev_ap_park_gdt;
struct desc_ptr *gdt_descr;
- u64 *ap_jumptable_gdt;
+ int idx;

header = base;

@@ -773,8 +806,13 @@ static void __init sev_es_setup_ap_jump_table_data(void *base, u32 pa)
* real-mode.
*/
ap_jumptable_gdt = (u64 *)(base + header->gdt_offset);
- ap_jumptable_gdt[SEV_APJT_CS16 / 8] = GDT_ENTRY(0x9b, pa, 0xffff);
- ap_jumptable_gdt[SEV_APJT_DS16 / 8] = GDT_ENTRY(0x93, pa, 0xffff);
+ sev_ap_park_gdt = __va(real_mode_header->sev_ap_park_gdt);
+
+ idx = SEV_APJT_CS16 / 8;
+ ap_jumptable_gdt[idx] = sev_ap_park_gdt[idx] = GDT_ENTRY(0x9b, pa, 0xffff);
+
+ idx = SEV_APJT_DS16 / 8;
+ ap_jumptable_gdt[idx] = sev_ap_park_gdt[idx] = GDT_ENTRY(0x93, pa, 0xffff);

/* Write correct GDT base address into GDT descriptor */
gdt_descr = (struct desc_ptr *)(base + header->gdt_offset);
diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile
index 83f1b6a56449..a7f84d43a0a3 100644
--- a/arch/x86/realmode/rm/Makefile
+++ b/arch/x86/realmode/rm/Makefile
@@ -27,11 +27,12 @@ wakeup-objs += video-vga.o
wakeup-objs += video-vesa.o
wakeup-objs += video-bios.o

-realmode-y += header.o
-realmode-y += trampoline_$(BITS).o
-realmode-y += stack.o
-realmode-y += reboot.o
-realmode-$(CONFIG_ACPI_SLEEP) += $(wakeup-objs)
+realmode-y += header.o
+realmode-y += trampoline_$(BITS).o
+realmode-y += stack.o
+realmode-y += reboot.o
+realmode-$(CONFIG_ACPI_SLEEP) += $(wakeup-objs)
+realmode-$(CONFIG_AMD_MEM_ENCRYPT) += sev_ap_park.o

targets += $(realmode-y)

diff --git a/arch/x86/realmode/rm/header.S b/arch/x86/realmode/rm/header.S
index 8c1db5bf5d78..6c17f8fd1eb4 100644
--- a/arch/x86/realmode/rm/header.S
+++ b/arch/x86/realmode/rm/header.S
@@ -22,6 +22,9 @@ SYM_DATA_START(real_mode_header)
.long pa_trampoline_header
#ifdef CONFIG_AMD_MEM_ENCRYPT
.long pa_sev_es_trampoline_start
+ .long pa_sev_ap_park_asm
+ .long __KERNEL32_CS
+ .long pa_sev_ap_park_gdt;
#endif
#ifdef CONFIG_X86_64
.long pa_trampoline_pgd;
diff --git a/arch/x86/realmode/rm/sev_ap_park.S b/arch/x86/realmode/rm/sev_ap_park.S
new file mode 100644
index 000000000000..0b63d0569d4d
--- /dev/null
+++ b/arch/x86/realmode/rm/sev_ap_park.S
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page_types.h>
+#include <asm/processor-flags.h>
+#include <asm/msr-index.h>
+#include <asm/sev-ap-jumptable.h>
+#include "realmode.h"
+
+ .section ".text32", "ax"
+ .code32
+/*
+ * The following code switches to 16-bit protected mode and sets up the
+ * execution environment for the AP Jump Table blob. Then it jumps to the AP
+ * Jump Table to park the AP.
+ *
+ * The code was copied from reboot.S and modified to fit the SEV-ES requirements
+ * for AP parking. When this code is entered, all registers except %EAX-%EDX are
+ * in reset state.
+ *
+ * The AP Jump Table physical base address is in %EBX upon entry.
+ *
+ * %EAX, %ECX, %EDX and EFLAGS are undefined. Only use registers %EAX-%EDX and
+ * %ESP in this code.
+ */
+SYM_CODE_START(sev_ap_park_asm)
+
+ /* Switch to trampoline GDT as it is guaranteed < 4 GiB */
+ movl $__KERNEL_DS, %eax
+ movl %eax, %ds
+ lgdt pa_tr_gdt
+
+ /* Disable paging to drop us out of long mode */
+ movl %cr0, %eax
+ btcl $X86_CR0_PG_BIT, %eax
+ movl %eax, %cr0
+
+ ljmpl $__KERNEL32_CS, $pa_sev_ap_park_paging_off
+
+SYM_INNER_LABEL(sev_ap_park_paging_off, SYM_L_GLOBAL)
+ /* Clear EFER */
+ movl $0, %eax
+ movl $0, %edx
+ movl $MSR_EFER, %ecx
+ wrmsr
+
+ /* Clear CR3 */
+ movl $0, %ecx
+ movl %ecx, %cr3
+
+ /* Set up the IDT for real mode. */
+ lidtl pa_machine_real_restart_idt
+
+ /*
+ * Load the GDT with the 16-bit segments for the AP Jump Table
+ */
+ lgdtl pa_sev_ap_park_gdt
+
+ /* Setup Code and Data segments for AP Jump Table */
+ movw $SEV_APJT_DS16, %ax
+ movw %ax, %ds
+ movw %ax, %ss
+
+ /* Jump to the AP Jump Table into 16 bit protected mode */
+ ljmpw $SEV_APJT_CS16, $SEV_APJT_ENTRY
+SYM_CODE_END(sev_ap_park_asm)
+
+ .data
+ .balign 16
+SYM_DATA_START(sev_ap_park_gdt)
+ /* Self-pointer */
+ .word sev_ap_park_gdt_end - sev_ap_park_gdt - 1
+ .long pa_sev_ap_park_gdt
+ .word 0
+
+ /*
+ * Offset 0x8
+ * 32 bit code segment descriptor pointing to AP Jump table base
+ * Setup at runtime in sev_es_setup_ap_jump_table_data().
+ */
+ .quad 0
+
+ /*
+ * Offset 0x10
+ * 32 bit data segment descriptor pointing to AP Jump table base
+ * Setup at runtime in sev_es_setup_ap_jump_table_data().
+ */
+ .quad 0
+SYM_DATA_END_LABEL(sev_ap_park_gdt, SYM_L_GLOBAL, sev_ap_park_gdt_end)
--
2.31.1
\
 
 \ /
  Last update: 2021-07-05 10:29    [W:1.258 / U:1.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site