lkml.org 
[lkml]   [2021]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Documentation: gpio: driver.rst: Remove gpiochip_irqchip_add mention
Date
This function was removed in commit f1f37abbe6fc ("gpio: Retire the
explicit gpio irqchip code") but this mention was left behind.
Also, mention that .set_type() only has to set a line handler if the chip
is cascaded, as opposed to hierarchical.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
---
Documentation/driver-api/gpio/driver.rst | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index d6b0d779859b..bbc53920d4dd 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -547,13 +547,10 @@ To use the helpers please keep the following in mind:
the irqchip can initialize. E.g. .dev and .can_sleep shall be set up
properly.

-- Nominally set all handlers to handle_bad_irq() in the setup call and pass
- handle_bad_irq() as flow handler parameter in gpiochip_irqchip_add() if it is
- expected for GPIO driver that irqchip .set_type() callback will be called
- before using/enabling each GPIO IRQ. Then set the handler to
- handle_level_irq() and/or handle_edge_irq() in the irqchip .set_type()
- callback depending on what your controller supports and what is requested
- by the consumer.
+- Nominally set gpio_irq_chip.handler to handle_bad_irq. Then, if your irqchip
+ is cascaded, set the handler to handle_level_irq() and/or handle_edge_irq()
+ in the irqchip .set_type() callback depending on what your controller
+ supports and what is requested by the consumer.


Locking IRQ usage
--
2.32.0
\
 
 \ /
  Last update: 2021-07-05 02:45    [W:0.042 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site