lkml.org 
[lkml]   [2021]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 11/12] ARM: tegra: Add new properties to USB PHY device-tree nodes
Date
Add new properties to USB PHYs needed for enabling USB OTG mode.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
arch/arm/boot/dts/tegra114.dtsi | 6 ++++++
arch/arm/boot/dts/tegra124.dtsi | 9 +++++++++
arch/arm/boot/dts/tegra20.dtsi | 9 +++++++++
arch/arm/boot/dts/tegra30.dtsi | 9 +++++++++
4 files changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index fb99b3e971c3..c04817851bce 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -706,6 +706,7 @@ phy1: usb-phy@7d000000 {
compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x7d000000 0x4000>,
<0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USBD>,
<&tegra_car TEGRA114_CLK_PLL_U>,
@@ -725,6 +726,8 @@ phy1: usb-phy@7d000000 {
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
nvidia,has-utmi-pad-registers;
+ nvidia,pmc = <&tegra_pmc>;
+ nvidia,phy-instance = <0>;
status = "disabled";
};

@@ -744,6 +747,7 @@ phy3: usb-phy@7d008000 {
compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x7d008000 0x4000>,
<0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USB3>,
<&tegra_car TEGRA114_CLK_PLL_U>,
@@ -762,6 +766,8 @@ phy3: usb-phy@7d008000 {
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,pmc = <&tegra_pmc>;
+ nvidia,phy-instance = <2>;
status = "disabled";
};

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 8b38f123f554..0daa1e97c1f6 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -1094,6 +1094,7 @@ phy1: usb-phy@7d000000 {
compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x0 0x7d000000 0x0 0x4000>,
<0x0 0x7d000000 0x0 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA124_CLK_USBD>,
<&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1113,6 +1114,8 @@ phy1: usb-phy@7d000000 {
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
nvidia,has-utmi-pad-registers;
+ nvidia,pmc = <&tegra_pmc>;
+ nvidia,phy-instance = <0>;
status = "disabled";
};

@@ -1132,6 +1135,7 @@ phy2: usb-phy@7d004000 {
compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x0 0x7d004000 0x0 0x4000>,
<0x0 0x7d000000 0x0 0x4000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA124_CLK_USB2>,
<&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1150,6 +1154,8 @@ phy2: usb-phy@7d004000 {
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,pmc = <&tegra_pmc>;
+ nvidia,phy-instance = <1>;
status = "disabled";
};

@@ -1169,6 +1175,7 @@ phy3: usb-phy@7d008000 {
compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x0 0x7d008000 0x0 0x4000>,
<0x0 0x7d000000 0x0 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA124_CLK_USB3>,
<&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1187,6 +1194,8 @@ phy3: usb-phy@7d008000 {
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,pmc = <&tegra_pmc>;
+ nvidia,phy-instance = <2>;
status = "disabled";
};

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 70d81a6cbc61..d4c068415bfd 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -875,6 +875,7 @@ phy1: usb-phy@c5000000 {
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5000000 0x4000>,
<0xc5000000 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA20_CLK_USBD>,
<&tegra_car TEGRA20_CLK_PLL_U>,
@@ -893,6 +894,8 @@ phy1: usb-phy@c5000000 {
nvidia,xcvr-lsfslew = <1>;
nvidia,xcvr-lsrslew = <1>;
nvidia,has-utmi-pad-registers;
+ nvidia,pmc = <&tegra_pmc>;
+ nvidia,phy-instance= <0>;
status = "disabled";
};

@@ -913,6 +916,7 @@ usb@c5004000 {
phy2: usb-phy@c5004000 {
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5004000 0x4000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "ulpi";
clocks = <&tegra_car TEGRA20_CLK_USB2>,
<&tegra_car TEGRA20_CLK_PLL_U>,
@@ -921,6 +925,8 @@ phy2: usb-phy@c5004000 {
resets = <&tegra_car 58>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
#phy-cells = <0>;
+ nvidia,pmc = <&tegra_pmc>;
+ nvidia,phy-instance= <1>;
status = "disabled";
};

@@ -942,6 +948,7 @@ phy3: usb-phy@c5008000 {
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5008000 0x4000>,
<0xc5000000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA20_CLK_USB3>,
<&tegra_car TEGRA20_CLK_PLL_U>,
@@ -958,6 +965,8 @@ phy3: usb-phy@c5008000 {
nvidia,xcvr-setup = <9>;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
+ nvidia,pmc = <&tegra_pmc>;
+ nvidia,phy-instance= <2>;
status = "disabled";
};

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 377bbc50ad2a..f6d63799f05d 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -1143,6 +1143,7 @@ phy1: usb-phy@7d000000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d000000 0x4000>,
<0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USBD>,
<&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1163,6 +1164,8 @@ phy1: usb-phy@7d000000 {
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,has-utmi-pad-registers;
+ nvidia,pmc = <&tegra_pmc>;
+ nvidia,phy-instance = <0>;
status = "disabled";
};

@@ -1184,6 +1187,7 @@ phy2: usb-phy@7d004000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d004000 0x4000>,
<0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB2>,
<&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1203,6 +1207,8 @@ phy2: usb-phy@7d004000 {
nvidia,xcvr-hsslew = <32>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
+ nvidia,pmc = <&tegra_pmc>;
+ nvidia,phy-instance = <1>;
status = "disabled";
};

@@ -1224,6 +1230,7 @@ phy3: usb-phy@7d008000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d008000 0x4000>,
<0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB3>,
<&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1243,6 +1250,8 @@ phy3: usb-phy@7d008000 {
nvidia,xcvr-hsslew = <32>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
+ nvidia,pmc = <&tegra_pmc>;
+ nvidia,phy-instance = <2>;
status = "disabled";
};

--
2.32.0
\
 
 \ /
  Last update: 2021-07-05 01:10    [W:0.118 / U:4.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site