lkml.org 
[lkml]   [2021]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.13 39/85] media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() to set xvclk on/off
Date
From: Dillon Min <dillon.minfei@gmail.com>

[ Upstream commit 24786ccd9c80fdb05494aa4d90fcb8f34295c193 ]

On some platform(imx6q), xvclk might not switch on in advance,
also for power save purpose, xvclk should not be always on.
so, add clk_prepare_enable(), clk_disable_unprepare() in driver
side to set xvclk on/off at proper stage.

Add following changes:
- add 'struct clk *clk;' in 'struct ov2659 {}'
- enable xvclk in ov2659_power_on()
- disable xvclk in ov2659_power_off()

Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/ov2659.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index 42f64175a6df..fb78a1cedc03 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -204,6 +204,7 @@ struct ov2659 {
struct i2c_client *client;
struct v4l2_ctrl_handler ctrls;
struct v4l2_ctrl *link_frequency;
+ struct clk *clk;
const struct ov2659_framesize *frame_size;
struct sensor_register *format_ctrl_regs;
struct ov2659_pll_ctrl pll;
@@ -1270,6 +1271,8 @@ static int ov2659_power_off(struct device *dev)

gpiod_set_value(ov2659->pwdn_gpio, 1);

+ clk_disable_unprepare(ov2659->clk);
+
return 0;
}

@@ -1278,9 +1281,17 @@ static int ov2659_power_on(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov2659 *ov2659 = to_ov2659(sd);
+ int ret;

dev_dbg(&client->dev, "%s:\n", __func__);

+ ret = clk_prepare_enable(ov2659->clk);
+ if (ret) {
+ dev_err(&client->dev, "%s: failed to enable clock\n",
+ __func__);
+ return ret;
+ }
+
gpiod_set_value(ov2659->pwdn_gpio, 0);

if (ov2659->resetb_gpio) {
@@ -1425,7 +1436,6 @@ static int ov2659_probe(struct i2c_client *client)
const struct ov2659_platform_data *pdata = ov2659_get_pdata(client);
struct v4l2_subdev *sd;
struct ov2659 *ov2659;
- struct clk *clk;
int ret;

if (!pdata) {
@@ -1440,11 +1450,11 @@ static int ov2659_probe(struct i2c_client *client)
ov2659->pdata = pdata;
ov2659->client = client;

- clk = devm_clk_get(&client->dev, "xvclk");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
+ ov2659->clk = devm_clk_get(&client->dev, "xvclk");
+ if (IS_ERR(ov2659->clk))
+ return PTR_ERR(ov2659->clk);

- ov2659->xvclk_frequency = clk_get_rate(clk);
+ ov2659->xvclk_frequency = clk_get_rate(ov2659->clk);
if (ov2659->xvclk_frequency < 6000000 ||
ov2659->xvclk_frequency > 27000000)
return -EINVAL;
@@ -1506,7 +1516,9 @@ static int ov2659_probe(struct i2c_client *client)
ov2659->frame_size = &ov2659_framesizes[2];
ov2659->format_ctrl_regs = ov2659_formats[0].format_ctrl_regs;

- ov2659_power_on(&client->dev);
+ ret = ov2659_power_on(&client->dev);
+ if (ret < 0)
+ goto error;

ret = ov2659_detect(sd);
if (ret < 0)
--
2.30.2
\
 
 \ /
  Last update: 2021-07-05 01:10    [W:0.307 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site