lkml.org 
[lkml]   [2021]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v3 10/12] arm64: tegra132: Add new properties to USB PHY device-tree node
    Date
    Add new properties to USB PHYs needed for enabling USB OTG mode.

    Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
    ---
    arch/arm64/boot/dts/nvidia/tegra132.dtsi | 9 +++++++++
    1 file changed, 9 insertions(+)

    diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
    index 9928a87f593a..fa3bab8138f5 100644
    --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
    +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
    @@ -1123,6 +1123,7 @@ phy1: usb-phy@7d000000 {
    compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
    reg = <0x0 0x7d000000 0x0 0x4000>,
    <0x0 0x7d000000 0x0 0x4000>;
    + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
    phy_type = "utmi";
    clocks = <&tegra_car TEGRA124_CLK_USBD>,
    <&tegra_car TEGRA124_CLK_PLL_U>,
    @@ -1142,6 +1143,8 @@ phy1: usb-phy@7d000000 {
    nvidia,hsdiscon-level = <5>;
    nvidia,xcvr-hsslew = <12>;
    nvidia,has-utmi-pad-registers;
    + nvidia,pmc = <&tegra_pmc>;
    + nvidia,phy-instance = <0>;
    status = "disabled";
    };

    @@ -1162,6 +1165,7 @@ phy2: usb-phy@7d004000 {
    compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
    reg = <0x0 0x7d004000 0x0 0x4000>,
    <0x0 0x7d000000 0x0 0x4000>;
    + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
    phy_type = "utmi";
    clocks = <&tegra_car TEGRA124_CLK_USB2>,
    <&tegra_car TEGRA124_CLK_PLL_U>,
    @@ -1180,6 +1184,8 @@ phy2: usb-phy@7d004000 {
    nvidia,hssquelch-level = <2>;
    nvidia,hsdiscon-level = <5>;
    nvidia,xcvr-hsslew = <12>;
    + nvidia,pmc = <&tegra_pmc>;
    + nvidia,phy-instance = <1>;
    status = "disabled";
    };

    @@ -1200,6 +1206,7 @@ phy3: usb-phy@7d008000 {
    compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
    reg = <0x0 0x7d008000 0x0 0x4000>,
    <0x0 0x7d000000 0x0 0x4000>;
    + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
    phy_type = "utmi";
    clocks = <&tegra_car TEGRA124_CLK_USB3>,
    <&tegra_car TEGRA124_CLK_PLL_U>,
    @@ -1218,6 +1225,8 @@ phy3: usb-phy@7d008000 {
    nvidia,hssquelch-level = <2>;
    nvidia,hsdiscon-level = <5>;
    nvidia,xcvr-hsslew = <12>;
    + nvidia,pmc = <&tegra_pmc>;
    + nvidia,phy-instance = <2>;
    status = "disabled";
    };

    --
    2.32.0
    \
     
     \ /
      Last update: 2021-07-05 00:57    [W:21.549 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site