lkml.org 
[lkml]   [2021]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] mtd: rawnand: denali: add more delays before latching incoming data
On Thu, Jul 1, 2021 at 3:47 AM Ralph Siemsen <ralph.siemsen@linaro.org> wrote:
>
> On Tue, Mar 17, 2020 at 04:18:21PM +0900, Masahiro Yamada wrote:
> >
> >Marek Vasut reported this driver in the latest kernel does not work
> >on his SOCFPGA board. (The on-board NAND chip is mode 5)
>
> In a bit of an ironic twist, this change seems to cause a regression for
> me. I'm also using a Cyclone V SoC system, similar but not the same as
> the SOCFPGA eval board. The NAND device in my case is S34ML04G2.
>
> It worked fine in 4.9, 4.19 and 5.4 kernels. However after upgrading to
> 5.10 the NAND driver fails with "timeout while waiting for irq 0x4",
> just as was reported back in 2018:
> https://lore.kernel.org/linux-mtd/737ejrj81y.fsf@pengutronix.de/
>
> Reverting commit 5756f2e8dad46eba6e2d3e530243b8eff4dd5a42 restores the
> behaviour in my case, but that would presumably break the SOCFPGA board.
>
> Any thoughts on how we could make it work for everybody?
>
> Ralph


I no longer have any hardware to test this driver.

If you increase data_setup_on_host (the current value is 10000),
will it solve your issue?





--
Best Regards
Masahiro Yamada

\
 
 \ /
  Last update: 2021-07-04 18:03    [W:0.165 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site