lkml.org 
[lkml]   [2021]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/6] perf cs-etm: Initialise architecture based on TRCIDR1
On Thu, Jul 22, 2021 at 12:10:35PM +0100, Mike Leach wrote:
> HI James
>
> On Wed, 21 Jul 2021 at 10:07, James Clark <james.clark@arm.com> wrote:
> >
> > Currently the architecture is hard coded as ARCH_V8, but with the
> > introduction of ETE we want to pick ARCH_AA64. And this change is also
> > applicable to ETM v4.4 onwards as well.
> >
> > Signed-off-by: James Clark <james.clark@arm.com>
> > ---
> > tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 14 +++++++++++++-
> > 1 file changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
> > index 30889a9d0165..5972a8afcc6b 100644
> > --- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
> > +++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
> > @@ -126,6 +126,18 @@ static int cs_etm_decoder__gen_etmv3_config(struct cs_etm_trace_params *params,
> > return 0;
> > }
> >
> > +#define TRCIDR1_TRCARCHMIN_SHIFT 4
> > +#define TRCIDR1_TRCARCHMIN_MASK GENMASK(7, 4)
> > +#define TRCIDR1_TRCARCHMIN(x) (((x) & TRCIDR1_TRCARCHMIN_MASK) >> TRCIDR1_TRCARCHMIN_SHIFT)
> > +static enum _ocsd_arch_version cs_etm_decoder__get_arch_ver(u32 reg_idr1)
> > +{
> > + /*
> > + * If the ETM trace minor version is 4 or more then we can assume
> > + * the architecture is ARCH_AA64 rather than just V8
> > + */
> > + return TRCIDR1_TRCARCHMIN(reg_idr1) >= 4 ? ARCH_AA64 : ARCH_V8;
> > +}
>
> This is true for ETM4.x & ETE 1.x (arch 5.x) but not ETM 3.x
> Probably need to beef up this comment or the function name to emphasise this.

Yeah, I think it's good to change the function name. Eventually, this
function should only be used for ETM4.x and ETE.

Another minor comment is: can we refine the arch version number, e.g.
change the OpenCSD's macro "ARCH_AA64" to "ARCH_V8R4", (or
"ARCH_V8R3_AA64"), this can give more clear clue what's the ETM version.

And a nitpick: how about to change OpenCSD macro "ARCH_V8r3" to
"ARCH_V8R3" and assign it for ETMv4.3 IPs.

Thanks,
Leo

\
 
 \ /
  Last update: 2021-07-31 08:04    [W:0.099 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site