lkml.org 
[lkml]   [2021]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 12/12] arm64: tegra132: Add new properties to USB PHY device-tree node
Date
Add new properties to USB PHYs needed for enabling USB OTG mode.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
arch/arm64/boot/dts/nvidia/tegra132.dtsi | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 9928a87f593a..f79a66226457 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -1123,6 +1123,7 @@ phy1: usb-phy@7d000000 {
compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x0 0x7d000000 0x0 0x4000>,
<0x0 0x7d000000 0x0 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA124_CLK_USBD>,
<&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1142,6 +1143,7 @@ phy1: usb-phy@7d000000 {
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
nvidia,has-utmi-pad-registers;
+ nvidia,pmc = <&tegra_pmc 0>;
status = "disabled";
};

@@ -1162,6 +1164,7 @@ phy2: usb-phy@7d004000 {
compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x0 0x7d004000 0x0 0x4000>,
<0x0 0x7d000000 0x0 0x4000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA124_CLK_USB2>,
<&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1180,6 +1183,7 @@ phy2: usb-phy@7d004000 {
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,pmc = <&tegra_pmc 1>;
status = "disabled";
};

@@ -1200,6 +1204,7 @@ phy3: usb-phy@7d008000 {
compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
reg = <0x0 0x7d008000 0x0 0x4000>,
<0x0 0x7d000000 0x0 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA124_CLK_USB3>,
<&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1218,6 +1223,7 @@ phy3: usb-phy@7d008000 {
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,pmc = <&tegra_pmc 2>;
status = "disabled";
};

--
2.32.0
\
 
 \ /
  Last update: 2021-07-31 19:39    [W:0.117 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site