lkml.org 
[lkml]   [2021]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] arm64: dts: rockchip: add thermal fan control to rockpro64
Date
The rockpro64 had a fan node since
commit 5882d65c1691 ("arm64: dts: rockchip: Add PWM fan for RockPro64")
however it was never tied into the thermal driver for automatic control.

Add the links to the thermal node to permit the kernel to handle this
automatically.
Borrowed from the (rk3399-khadas-edge.dtsi).

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---

Changelog:
v2:
Adjusted fan setpoints for less noise

.../boot/dts/rockchip/rk3399-rockpro64.dtsi | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 6bff8db7d33e..0d79e6ae1c3a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -69,6 +69,7 @@ diy_led: led-1 {

fan: pwm-fan {
compatible = "pwm-fan";
+ cooling-levels = <0 100 150 200 255>;
#cooling-cells = <2>;
fan-supply = <&vcc12v_dcin>;
pwms = <&pwm1 0 50000 0>;
@@ -245,6 +246,34 @@ &cpu_b1 {
cpu-supply = <&vdd_cpu_b>;
};

+&cpu_thermal {
+ trips {
+ cpu_warm: cpu_warm {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu_hot {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map2 {
+ trip = <&cpu_warm>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map3 {
+ trip = <&cpu_hot>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
&emmc_phy {
status = "okay";
};
@@ -281,6 +310,34 @@ &gpu {
status = "okay";
};

+&gpu_thermal {
+ trips {
+ gpu_warm: gpu_warm {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ gpu_hot: gpu_hot {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&gpu_warm>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map2 {
+ trip = <&gpu_hot>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
&i2c0 {
clock-frequency = <400000>;
i2c-scl-rising-time-ns = <168>;
--
2.25.1
\
 
 \ /
  Last update: 2021-07-30 16:03    [W:0.033 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site