lkml.org 
[lkml]   [2021]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [PATCH v2] Bluetooth: Shutdown controller after workqueues are flushed or cancelled
    Date
    Hi Kai-Heng,

    Kai-Heng Feng <kai.heng.feng@canonical.com> writes:

    > On Wed, Jul 28, 2021 at 9:50 PM Mattijs Korpershoek
    > <mkorpershoek@baylibre.com> wrote:
    >>
    >> Hi Kai-Heng, Marcel,
    >>
    >> Marcel Holtmann <marcel@holtmann.org> writes:
    >>
    >> > Hi Kai-Heng,
    >> >
    >> >> Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it
    >> >> stops working:
    >> >> [ 509.691509] Bluetooth: hci0: HCI reset during shutdown failed
    >> >> [ 514.897584] Bluetooth: hci0: MSFT filter_enable is already on
    >> >> [ 530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
    >> >> [ 545.660350] usb 3-10: device descriptor read/64, error -110
    >> >> [ 561.283530] usb 3-10: device descriptor read/64, error -110
    >> >> [ 561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
    >> >> [ 566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500
    >> >> [ 568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113)
    >> >> [ 578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110)
    >> >> [ 586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113)
    >> >> [ 596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)
    >> >>
    >> >> Or kernel panics because other workqueues already freed skb:
    >> >> [ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000
    >> >> [ 2048.663775] #PF: supervisor read access in kernel mode
    >> >> [ 2048.663779] #PF: error_code(0x0000) - not-present page
    >> >> [ 2048.663782] PGD 0 P4D 0
    >> >> [ 2048.663787] Oops: 0000 [#1] SMP NOPTI
    >> >> [ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G W 5.13.0-rc1-next-20210510+ #20
    >> >> [ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020
    >> >> [ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50
    >> >> [ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1
    >> >> 07 83 f8 01
    >> >> [ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286
    >> >> [ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000
    >> >> [ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000
    >> >> [ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0
    >> >> [ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000
    >> >> [ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000
    >> >> [ 2048.663843] FS: 00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000
    >> >> [ 2048.663849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    >> >> [ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0
    >> >> [ 2048.663856] PKRU: 55555554
    >> >> [ 2048.663859] Call Trace:
    >> >> [ 2048.663865] ? skb_release_head_state+0x5e/0x80
    >> >> [ 2048.663873] kfree_skb+0x2f/0xb0
    >> >> [ 2048.663881] btusb_shutdown_intel_new+0x36/0x60 [btusb]
    >> >> [ 2048.663905] hci_dev_do_close+0x48c/0x5e0 [bluetooth]
    >> >> [ 2048.663954] ? __cond_resched+0x1a/0x50
    >> >> [ 2048.663962] hci_rfkill_set_block+0x56/0xa0 [bluetooth]
    >> >> [ 2048.664007] rfkill_set_block+0x98/0x170
    >> >> [ 2048.664016] rfkill_fop_write+0x136/0x1e0
    >> >> [ 2048.664022] vfs_write+0xc7/0x260
    >> >> [ 2048.664030] ksys_write+0xb1/0xe0
    >> >> [ 2048.664035] ? exit_to_user_mode_prepare+0x37/0x1c0
    >> >> [ 2048.664042] __x64_sys_write+0x1a/0x20
    >> >> [ 2048.664048] do_syscall_64+0x40/0xb0
    >> >> [ 2048.664055] entry_SYSCALL_64_after_hwframe+0x44/0xae
    >> >> [ 2048.664060] RIP: 0033:0x7fe02ac23c27
    >> >> [ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
    >> >> [ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
    >> >> [ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27
    >> >> [ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003
    >> >> [ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440
    >> >> [ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
    >> >> [ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff
    >> >>
    >> >> So move the shutdown callback to a place where workqueues are either
    >> >> flushed or cancelled to resolve the issue.
    >> >>
    >> >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
    >> >> ---
    >> >> v2:
    >> >> - Rebased on bluetooth-next.
    >> >>
    >> >> net/bluetooth/hci_core.c | 16 ++++++++--------
    >> >> 1 file changed, 8 insertions(+), 8 deletions(-)
    >> >
    >> > patch has been applied to bluetooth-next tree.
    >>
    >> This patch seems to introduce a regression in the btmtksdio driver.
    >> With this patch applied, I can't enable the hci0 interface anymore on mt8183-pumpkin:
    >>
    >> i500-pumpkin login: root
    >> root@i500-pumpkin:~# uname -a
    >> Linux i500-pumpkin 5.14.0-rc3 #94 SMP PREEMPT Wed Jul 28 11:58:20 CEST 2021 aarch64 aarch64 aarch64 GNU/Linux
    >> root@i500-pumpkin:~# hciconfig hci0 up
    >> Can't init device hci0: Connection timed out (110)
    >> root@i500-pumpkin:~# hciconfig hci0 down
    >> root@i500-pumpkin:~# hciconfig hci0 up
    >> Can't init device hci0: Input/output error (5)
    >>
    >> Reverting it fixes the above issue.
    >> Any suggestion on how to fix this without touching hci_core ?
    >> Maybe the btmtksdio driver needs some rework. As I'm not familiar with the code, I would appreciate any tips.
    >
    > Can you please attach dmesg? Also, full ftrace log on btmtksdio can
    > also be helpful.
    Thank you for your help. Sorry I did not post the logs previously.

    dmesg: https://pastebin.com/tpWDNyQr
    ftrace on btmtksdio: https://pastebin.com/jmhvmwUw

    Mattijs
    >
    > Kai-Heng
    >
    >>
    >> Thanks,
    >> Mattijs Korpershoek
    >>
    >>
    >> >
    >> > Regards
    >> >
    >> > Marcel

    \
     
     \ /
      Last update: 2021-07-30 13:41    [W:2.426 / U:0.312 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site