lkml.org 
[lkml]   [2021]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/4] nvmem: qfprom: Fix up qfprom_disable_fuse_blowing() ordering
Date
qfprom_disable_fuse_blowing() disables a bunch of resources,
and then does a few register writes in the 'conf' address
space.
It works perhaps because the resources are needed only for the
'raw' register space writes, and that the 'conf' space allows
read/writes regardless.
However that makes the code look confusing, so just move the
register writes before turning off the resources in the
function.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/nvmem/qfprom.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index 81fbad5..b0ca4c6 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -139,6 +139,9 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
{
int ret;

+ writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+ writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
+
/*
* This may be a shared rail and may be able to run at a lower rate
* when we're not blowing fuses. At the moment, the regulator framework
@@ -159,9 +162,6 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
"Failed to set clock rate for disable (ignoring)\n");

clk_disable_unprepare(priv->secclk);
-
- writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
- writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
}

/**
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2021-07-30 08:47    [W:0.081 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site