lkml.org 
[lkml]   [2021]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
Subject[GIT PULL] Compute Express Link (CXL) update for v5.14
Hi Linus, please pull from:

git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl tags/cxl-for-5.14

...to receive the CXL update for v5.14. This subsystem is still in the
build-out phase as the bulk of the update is improvements to
enumeration and fleshing out the device model. In terms of new
features, more mailbox commands have been added to the allowed-list in
support of persistent memory provisioning support targeting v5.15. The
critical update from an enumeration perspective is support for the CXL
Fixed Memory Window Structure that indicates to Linux which system
physical address ranges decode to the CXL Host Bridges in the system.
This allows the driver to detect which address ranges have been mapped
by firmware and what address ranges are available for future hotplug.

So, again, mostly skeleton this round, with more meat targeting v5.15.

The bulk of this has been in -next with no reported issues. The top 3
commits were promoted from the cxl 'pending' to 'next' branch recently
and -next has not had a chance to pick those up yet, but the kbuild
robot has chewed on that pending branch for a couple weeks.

Please pull, thanks.

---

The following changes since commit 4a2c1dcfaf59be4b357400d893c3f5daff6cab6c:

ACPICA: Add the CFMWS structure definition to the CEDT table
(2021-06-07 14:04:43 +0200)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl tags/cxl-for-5.14

for you to fetch changes up to 4ad6181e4b216ed0cb52f45d3c6d2c70c8ae9243:

cxl/pci: Rename CXL REGLOC ID (2021-06-17 17:37:18 -0700)

----------------------------------------------------------------
cxl for 5.14

- Add support for the CXL Fixed Memory Window Structure, a recent
extension of the ACPI CEDT (CXL Early Discovery Table)

- Add infrastructure for component registers

- Add HDM (Host-managed device memory) decoder definitions

- Define a device model for an HDM decoder tree

- Bridge CXL persistent memory capabilities to an NVDIMM bus /
device-model

- Switch to fine grained mapping of CXL MMIO registers to allow
different drivers / system software to own individual register blocks

- Enable media provisioning commands, and publish the label storage area
size in sysfs

- Miscellaneous cleanups and fixes

----------------------------------------------------------------
Alison Schofield (2):
cxl/acpi: Add the Host Bridge base address to CXL port objects
cxl/acpi: Use the ACPI CFMWS to create static decoder objects

Ben Widawsky (11):
cxl: Rename mem to pci
cxl/mem: Demarcate vendor specific capability IDs
cxl/mem: Use dev instead of pdev->dev
cxl/mem: Split creation from mapping in probe
cxl/mem: Move register locator logic into reg setup
cxl/mem: Get rid of @cxlm.base
cxl/pci: Add HDM decoder capabilities
cxl/hdm: Fix decoder count calculation
cxl/component_regs: Fix offset
cxl/pci: Add media provisioning required commands
cxl/pci: Rename CXL REGLOC ID

Dan Williams (17):
cxl/mem: Move some definitions to mem.h
cxl/mem: Introduce 'struct cxl_regs' for "composable" CXL devices
cxl/core: Rename bus.c to core.c
cxl/core: Refactor CXL register lookup for bridge reuse
cxl/docs: Fix "Title underline too short" warning
cxl/pci: Fixup devm_cxl_iomap_block() to take a 'struct device *'
Merge branch 'rafael/acpica/cfmws' into for-5.14/cxl
cxl/acpi: Introduce the root of a cxl_port topology
cxl/Kconfig: Default drivers to CONFIG_CXL_BUS
cxl/acpi: Add downstream port data to cxl_port instances
cxl/acpi: Enumerate host bridge root ports
cxl/acpi: Introduce cxl_decoder objects
cxl/core: Add cxl-bus driver infrastructure
cxl/pmem: Add initial infrastructure for pmem support
libnvdimm: Export nvdimm shutdown helper, nvdimm_delete()
libnvdimm: Drop unused device power management support
cxl/pmem: Register 'pmem' / cxl_nvdimm devices

Ira Weiny (4):
cxl/pci: Introduce cxl_decode_register_block()
cxl/pci: Reserve all device regions at once
cxl/pci: Map registers based on capabilities
cxl/pci: Reserve individual register block regions

Vishal Verma (1):
cxl/pci.c: Add a 'label_storage_size' attribute to the memdev

Documentation/ABI/testing/sysfs-bus-cxl | 103 +++
Documentation/driver-api/cxl/memory-devices.rst | 20 +-
drivers/cxl/Kconfig | 43 +-
drivers/cxl/Makefile | 12 +-
drivers/cxl/acpi.c | 434 +++++++++
drivers/cxl/bus.c | 29 -
drivers/cxl/core.c | 1067 +++++++++++++++++++++++
drivers/cxl/cxl.h | 332 +++++--
drivers/cxl/mem.h | 81 ++
drivers/cxl/{mem.c => pci.c} | 439 ++++++----
drivers/cxl/pci.h | 2 +-
drivers/cxl/pmem.c | 230 +++++
drivers/nvdimm/bus.c | 64 +-
drivers/nvdimm/dimm_devs.c | 18 +
include/linux/libnvdimm.h | 1 +
include/uapi/linux/cxl_mem.h | 12 +
16 files changed, 2596 insertions(+), 291 deletions(-)
create mode 100644 drivers/cxl/acpi.c
delete mode 100644 drivers/cxl/bus.c
create mode 100644 drivers/cxl/core.c
create mode 100644 drivers/cxl/mem.h
rename drivers/cxl/{mem.c => pci.c} (86%)
create mode 100644 drivers/cxl/pmem.c

\
 
 \ /
  Last update: 2021-07-03 17:09    [W:0.218 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site